01079-031

H25 OMNICODER Introduction The Omnicoder features a patented dynamic encoder resolution capability that allows users to easily program the encoder resolution to any value between 1 and 10,000 counts per turn. Packaged in BEIs flagship Model H25 incremental encoder, the Omnicoder allows for virtually unlimited resolution variations. Using the simple programming interface software and USB interface cable, users can program the encoder resolution on site as needed. In the software, type the encoder resolution and click Program. A new resolution is now programmed. Its that easy With the Omnicoder , resolution can be programmed and reprogrammed at any time by the user. For users with multiple resolution requirements, Omnicoders can be kept in stock and programmed as needed. SPECIFICATIONS Mechanical Shaft Diameter 3/8 (1/2as special feature) Flat On Shaft 3/8 Shaft: 0.80 long X 0.03 deep 1/2 Shaft: 0.80 long X 0.04 deep Shaft Loading 3/8 shaft: Up to 40 pounds axial and 35 pounds radial 1/2 shaft: Up to 90 pounds axial and 80 pounds radial Shaft Runout 0.0005 T.I.R. at midpoint regardless of shaft diameter Starting Torque at 25C Without shaft seal 1.0 in-oz (max) With shaft seal 2.5 in-oz (max) 1/2 shaft with shaft seal: 3.5 in-oz (max) Bearings Class ABEC 7 standard, ABEC 5 for 1/2 shaft Shaft Material 416 stainless steel Bearing Housing Die cast aluminum with protective finish stainless steel (special feature) Cover Die cast aluminum stainless steel (special feature) 8 10 Bearing Life 2 X 10 revs (1300 hrs at 2500 RPM) at rated load 1 X 10 revs (67,000 hrs at 2500 RPM) at 10% of rated load Maximum RPM 12,000 RPM nominal, 8000 RPM with 1/2 shaft (see Frequency Response, below) 30,000 RPM available on units with 3/8 shaftconsult with factory -4 2 2 Moment of Inertia 4.1 X 10 oz-in-sec 5.2 X 10-4 oz-in-sec with 1/2 shaft Weight 13 oz typical, 14.5 oz typical with 1/2 shaft Page 1 www.sensata.com Copyright 2018 Sensata Technologies, Inc. SPECIFICATIONS (CONTINUED) Electrical Code Incremental Output Format 2 channels in quadrature, 1/2 cycle index gated with negative B channel Cycles per Shaft Turn 1 to 10,000 reprogrammable resolutions. Place OMNI in resolution option box. Supply Voltage 5 to 28 VDC available Current Requirements 140 mA typical + output load, 290 mA (max). Voltage/Output (see note 5) 28V/V: Line Driver, 528 VDC in, Vout = Vin Protection Level Reverse, overvoltage and output short circuit (see note 5) Frequency Response Max RPM of 3,000. Output Terminations M18 Note Consult factory for other electrical options Environmental Enclosure Rating NEMA 4 & 13 (IP 66) when ordered with shaft seal (on units with an MS connector) or a cable gland (on units with cable termination). Temperature Operating, 0 to 70 C extended temperature testing available (see note 8) Storage, -25 to 90 C unless extended temperature option called out. Shock 50 gs for 11 msec duration Vibration 5 to 2000 Hz 20 gs Humidity 98% RH without condensation Notes & Tables: All notes and tables referred to in the text can be found on page 5. Page 2 www.sensata.com Copyright 2018 Sensata Technologies, Inc.