20LPCV2440 Sensata

LPCV Series Linear proportional controller Ratings from 15A to 110A 240 VAC 0-5 V DC, 0-10 V DC, or 4-20mA input For use with resistive loads only PRODUCT SELECTION Description 15 A 25 A 40 A 75 A 110 A 0-5 VDC Control 5LPCV2415 5LPCV2425 5LPCV2440 5LPCV2475 5LPCV24110 0-10 VDC Control 10LPCV2415 10LPCV2425 10LPCV2440 10LPCV2475 10LPCV24110 4-20 mA Control 20LPCV2415 20LPCV2425 20LPCV2440 20LPCV2475 20LPCV24110 OUTPUT SPECIFICATIONS (voltage) (1) Description 240 VAC Operating Voltage (60Hz) Vrms 20-300 Transient Overvoltage Vpk 600 Maximum Off-State Leakage Current Rated Voltage mArms 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 200 OUTPUT SPECIFICATIONS (current) (1) Description 15 A 25 A 40 A 75 A 110 A Maximum Load Current Arms 15 25 40 75 110 Minimum Load Current Arms 0.10 0.10 0.10 0.15 0.20 Maximum Surge Current (16.6ms) Apk 150 250 625 1000 1500 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (Rjc) C/W 1.48 1.02 0.63 0.31 0.28 Maximum I t for Fusing (8.3 msec) A sec 94 260 1620 4150 9340 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description 5LPCV 10LPCV 20LPCV Control Voltage Range 0-5 VDC 0-10 VDC 4-20 mA Control Range Limits (Min/Msx) -0.5/10 VDC -1.0/20 VDC -0.5/25 mA Turn-On Threshold 0.25 VDC 0.5 VDC 4.5 mA Nominal Input Impedance 12.7K Ohm 25 K Ohm 460 Ohm Sync Voltage (terminal 6 and 7) 16-24 VAC 16-24 VAC 16-24 VAC POWER SUPPLY SPECIFICATION (4) Description PS120 PS240 Input Voltage 50/60Hz 120 VAC 240 VAC Output Voltage 50/60Hz (Sync Voltage) 20 VAC/100mA 20 VAC/100mA Ambient Operating Temperature Range -30 to 80C -30 to 80C Ambient Storage Temperature Range -40 to 125C -40 to 125C Terminals 6-32 Screws, .25 Fastons Screw Torque Requirement 6-32 Screws -10 in lbs. Weight (typical) 8.6 oz. (245g)GENERAL SPECIFICATIONS Description Dielectric Strength, signal to load 2500 Vrms Dielectric Strength, signal to Base 2500 Vrms Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -40 to 125C Weight (typical) 6.0 oz. (175g) Encapsulation Themally Conductive Epoxy Terminals 8-32 Screws, .25 Fastons Screw Torque Requirement 8-32 and 10-32 Screws - 20in. lbs. GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Linear taper potentiometer 1-10K Ohm, watt. 3) 50Hz models available. 4) 20 VAC must be in phase with load THERMAL DERATE INFORMATION TYPICAL APPLICATIONS Infrared and quartz heaters Thermal forming equipment Resistive heating elements Conveyor speed control Rectified DC motors Printing applications Industrial temperature controllers