7PCV2425 Sensata

Control Relays Datasheet PCV Series Proportional controller Ratings from 15 A to 90 A 280 VAC 2-7 VDC or 2-10 VDC analog input range For use with resistive loads only PRODUCT SELECTION Descrption 15 A 25 A 50 A 75 A 90 A 2-7 VDC Control 7PCV2415 7PCV2425 2-10 VDC Control 10PCV2415 10PCV2425 10PCV2450 10PCV2475 10PCV2490 OUTPUT SPECIFICATIONS (1) Description 15 A 25 A 50 A 75 A 90 A Operating Voltage (47-63Hz) Vrms 100-280 100-280 100-280 100-280 100-280 Transient Overvoltage Vpk 600 600 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 10 10 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 200 200 200 200 200 Maximum Load Current Arms 15 25 50 75 90 Minimum Load Current Arms 0.15 0.15 0.15 0.15 0.15 Maximum Surge Current (16.6ms) Apk 150 250 625 1000 1200 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 1.6 1.6 Maximum I t for Fusing (8.3 msec) A sec 94 260 1620 4150 6000 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description 7PCV24xx 10PCV24xx Control Voltage Range 2-7 VDC 2-10 VDC Typical Input Current 5 VDC 4 mA 4 mA GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Signal to Load (50/60Hz) 2500 Vrms Dielectric Strength, Signal to Base 2500 Vrms Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.5 oz. (100g) Encapsulation Themaly Conductive Epoxy Terminals Screws and Saddle clamps Furnished, Unmounted GENERAL NOTES (1) All parameters at 25C unless otherwise specied. Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.Control Relays Datasheet MECHANICAL SPECIFICATIONS 1.10 (27.9) MOUNTING HOLE/SLOT 8-32 TERMINAL .45 0.192 (4.9) DIA. (2 PLACES ) (11.4) Screw Torque Requirements: 6-32 Screws - 10 in. lbs., OUTPUT 2.30 8-32 and 10-32 Screws - 20in. lbs. 1 2 (58.4) (Screws dry without grease.) 1.87 1.70 (47.5) (43.2) -- + 4 3 INPUT 1.00 .78 BASE PLATE (25.4) 6-32 TERMINAL (19.8) .125 (3.2) (2 PLACES) .9 1.80 (45.7) (23.0) All dimensions are in inches (millimeters) WIRING DIAGRAM 7PCV24XX 100 80 60 ~ 60 Hz 40 20 0 0 1 2 3 4 5 6 7 1 OUTPUT 2 Input Voltage PROPORTIONAL CONTROLLER 10PCV24XX 4 3 INPUT 100 80 60 + -- 60 Hz 40 20 0 0 1 2 3 4 5 6 7 8 9 10 Input Voltage Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice. True RMS Output Voltage True RMS Output Voltage as a Percentage of Line Voltage as a Percentage of Line Voltage