84134110

GN Series Panel Mount SSRs 24 to 280 VAC and 48-660 VAC Current rating 10 and 125 Amps Output voltage 24-280 VAC and 48-660 VAC SCR Output for heavy industrial loads Available with or without IP20 touch-safe cover LED Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers AC or DC control EMC Compliant to Level 3 Epoxy Free Design IP00 Package, IP00 Package, IP20 Package Screw Terminal K option Hex Standoff Screw Terminal Previous version click here Control Voltage 10 Amp 75 Amp 125 Amp 25 Amp 50 Amp 100 Amp 3-32 VDC 84 134 000 84 134 030 84 134 040 84 134 080 84 134 010 84 134 020 18-36 VAC 84 134 002 84 134 032 84 134 042 84 134 082 84 134 012 84 134 022 90-280 VAC 84 134 001 84 134 031 84 134 081 84 134 011 84 134 021 84 134 041 Operating Voltage Termination 0: 24-280 VAC/Zero Voltage Turn-On Blank: Screws & clamps 1: 48-660 VAC/Zero Voltage Turn-On K: Installed standoffs with screws 2: 24-280 VAC/Instantenous Turn-On for PC board mounting Series 3: 48-660 VAC/Instantenous Turn-On (IP00 only) 8413 4 0 1 0 K H Touch Safe Cover Rated Load Control Voltage Thermal Pad 4: Not Included (IP00) Current 0: 3-32 VDC* Blank: Not Included 7: Included (IP20) 0: 10 Amps 1: 90-280 VAC H: Included Required for valid part number 1: 25 Amps 2: 18-36 VAC For options only and not required for valid part number 2: 50 Amps Not all part number conbinations are available. 3: 75 Amps > Contact Crouzet Technical Support for information on 4: 100 Amps the availability of a specific part number. * 4-32 VDC for 48-660 VAC models 8: 125 Amps Output Specification (1)... Description 280 VAC 660 VAC Operating Voltage (47-440Hz) Vrms 24-280 48-660 Transient Voltage Vpk (2) 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.25 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500GN Series I I 02 I www.crouzet-ssr.com Output Specifications (1) Description 10A 25A 50A 75A 100A 125A Maximum Load Current Arms (3) 10 25 50 75 100 125 Minimum Load Current mArms 50 50 100 100 100 100 Maximum 1 Cycle Surge Current (50/60Hz) Apk 150/175 275/300 710/750 1050/1100 1120/1200 1600/1700 1 Second Surge Current (Apk. Ta=25C) 50/60 Hz 50 85 150 225 300 375 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 1.35 1.3 1.3 1.25 Thermal Resistance Junction to Case (Rjc) C/W 0.4 0.4 0.25 0.16 0.16 0.11 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 110/120 380/370 2520/2320 5500/5000 6270/6000 12800/12050 Minimum Heat Sink for Rated Current 40C C/W 5 2 1 0.7 0.5 0.5 Input Specifications (1) Description 8413xxx0 8413xxx2 8413xxx1 Control Voltage Range 3-32 VDC 18-36 VAC 90-280 VAC (5) Maximum Reverse Voltage -32 VDC - - Minimum Turn-On Voltage 3 VDC (4) 18 VAC 90 VAC Minimum Turn-Off Voltage 1 VDC 4 VAC 10 VAC Minimum Input Current (for on-state) 10 mA 13 mA 6 mA Maximum Input Current mA 15 mA 15 mA 10 mA Nominal Input Impedance Ohms Current Regulated Current Regulated Current Regulated Maximum Turn-On Time msec 8.33 (6) 20 20 Maximum Turn-Off Time msec 8.33 30 30 General Specifications (1) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 +80 C Ambient Storage Temperature Range -40 +125 C Weight (typical) 2.53 oz (72 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lbs/Nm) (8) w/K option 8-10 / 0.9-1.13 Humidity 85% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40C ambient temperature (9) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (9) 7,210,376 hours (823 years) General Notes 1) All parameters at 25C unless otherwise specified. 2) Output will self trigger between 450-600Vpk / 900-1200Vpk for 280VAC/660VAC models not suitable for capacitive loads. 3) Heat sinking required, see derating curves. For K option maximum current up to 50 Amp. 4) 4-32VDC for 48-660VAC models. 5) For ambient temperatures above 40C the maximum control voltage must not exceed 250VAC. 6) Turn-on time for Instantaneous turn-on versions is 0.1 msec. 7) AC input models operating range is -20 to 80 C. 8) Option is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB thicknesses from 0.031 to 0.093 inches 0.79 to 2.36 mm ). 9) All parameters at 50% power rating and 100% duty cycle (contact Crouzet technical support for detailed report). 10) Load can be wired to either SSR output terminal 1 or 2. 11) For single surge pulse Tc=25C Tj=125C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by 2 (1.414).