PCB Mount DataSheet ASPF Series Mini-SIP SSR Ratings to 3A 280 VAC SCR output DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage Zero Crossing Random Fire 4-10 VDC ASPF240D3 ASPF240D3R (1) OUTPUT SPECIFICATIONS Description Operating Voltage (47-63Hz) Vrms 24-280 24-280 Transient Overvoltage Vpk 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 3.0 3.0 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 0.1 0.1 Maximum Load Current Arms Minimum Load Current Arms 60 100 Maximum Surge Current (16.6ms) Apk 40 40 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.5 0.5 0.5 Minimum Power Factor (with Maximum Load) (1) INPUT SPECIFICATIONS Description Control Voltage Range 4-10 VDC Must Turn On Voltage 4.0 VDC Must Turn Off Voltage 1.0 VDC Typical Input Current 5 VDC 15 mAdc 300 Ohm Nominal Input Impedance Maximum Turn-On Time msec (4) 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) (2) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (2) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30C to 80C Ambient Storage Temperature Range -30C to 125C Weight (typical) 0.35 oz. (10g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise noted. 2) Dielectric and insulation resistance are measured between input and output. 3) Off-State dv/dt test method per EIA/NARM standard RS-443. 4) Turn-On time for random turn-on versions is 0.01 msec (DC C Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.LOAD LOAD PCB Mount DataSheet WIRING DIAGRAM TRIGGER CIRCUIT 2 3 1 4 +DC -DC B A AC AC Load can be wired in location A or B THERMAL DERATE INFORMATION 3.0 2.5 2.0 1.5 1.0 0 20 40 60 80 AMBIENT TEMPERATURE (C) Max. Load Current vs. Temp. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. LOAD CURRENT (AMPS)