CMXE100D10 Sensata

PCB Mount DataSheet CMX Series SIP SSR Ratings to 20A 60 VDC, 10A 100 VDC, 10A 60 VDC and 3A 200 VDC MOSFET output DC control Low on-state impedance CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 3 A 5 A 6 A 10 A 10 A 20 A 3-10 VDC CMX200D3 CMX60D5 CMX100D6 CMX60D10 CMX100D10 CMX60D20 20-28 VDC CMXE200D3 CMXE60D5 CMXE100D6 CMXE60D10 CMXE100D10 CMXE60D20 (1)(5) OUTPUT SPECIFICATIONS Description Operating Voltage VDC 0-200 0-60 0-100 0-60 0-100 0-60 Maximum Off-State Leakage Current Rated Voltage Adc 100 100 100 100(6) 100 100 Maximum Load Current ADC 3 5 6 10 10 20 Minimum Load Current mADC 2 2 2 2 2 2 0.20 .10 .040 .018 .010 .0033 Maximum On-State Resistence Ohm (2) 30 60 100 100 100 200 Maximum Surge Current (10msec) Apk Maximum On-State Voltage Drop Rated Current VDC 0.6 0.5 0.24 0.18 0.1 0.1 (1) INPUT SPECIFICATIONS Description CMXE CMX Control Voltage Range 3.0-10.0 VDC 20-28 VDC Maximum Turn On Voltage 3.0 VDC 20 VDC Minimum Turn-Off Voltage 1 .0 VDC 1 .0 VDC Typical Input Current 12 mAdc 24 VDC 15 mAdc 5 VDC Nominal Input Impedance 300 Ohm 780 Ohm 1.0 Maximum Turn-On Time msec 1.0 Maximum Turn-Off Time sec 300 300 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) (3) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (3) 10 Ohms Maximum Capacitance, Input/Output 15 pF Ambient Operating Temperature Range (4) -30C to 80C Ambient Storage Temperature Range (4) -30C to 125C Weight (typical) 0.4 oz. (11g) Encapsulation Thermally Conductive Epoxy Enclosure and PCB Meet the requirements of IEC60335-1 Meets the requirements of solderability per IEC60068-2-20 GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) rated current (RDS-ON) 3) Dielectric and insulation resistance are measured between input and output 4) Low temperature range is limited to -10C in 20Amps models 5) Inductive loads should be diode suppressed 6) At 55 Vdc 7) Terminals are not suitable for bending or forming process. FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet WIRING DIAGRAM + LOAD +VDC 1 A Load can be wired in location A or B B LOAD 2 -VDC CONTROL CIRCUIT + +VDC 3 -VDC 4 THERMAL DERATE INFORMATION CMX100D6 12 CMX60D5 CMX200D3 10 7 8 6 CMX60D10 6 5 CMX100D10 4 4 2 3 0 2 20 40 60 80 1 AMBIENT TEMPERATURE (C) 0 20 40 60 80 AMBIENT TEMPERATURE (C) CMX60D20 20 16 12 8 4 0 20 40 60 80 AMBIENT TEMPERATURE (C) Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. LOAD CURRENT (AMPS) LOAD CURRENT (AMPS) LOAD CURRENT (AMPS)