CSE2450 Sensata

Panel Mount Datasheet CSE Series Ratings from 10A to 90A @ 24-280 V AC 15-32 VDC input range Low off-state leakage current (snubberless) SCR output for heavy industrial loads Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 10A 25A 50A 75A 90A 15-32 VDC CSE2410 CSE2425 CSE2450 CSE2475 CSE2490 AVAILABLE OPTIONS Switching Type Termination Input Status LED Operating Voltage Blank: Zero Voltage Turn-On Blank: Screw Blank: Not Included -10: Instantaneous Turn-On Series 24: 24-280 VAC F: Quick Connect G: Included CSE 24 10 F P G H -10 Rated Load Current Overvoltage Protection Thermal Pad 10: 10 Amp Blank: Not Included Blank: Not Included 25: 25 Amp P: Included (8) H: Included 50: 50 Amp 75: 75 Amp 90: 90 Amp Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description 10A 25A 50A 75A 90A Operating Voltage (47-440Hz) [Vrms] 24-280 24-280 24-280 24-280 24-280 Transient Overvoltage [Vpk] 600 600 600 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0 1.0 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) 500 500 500 500 500 Maximum Load Current (3) [Arms] 10 25 50 75 90 Minimum Load Current [Arms] 0.15 0.15 0.15 0.25 0.25 Maximum 1 Cycle Surge Current (50/60) [Apk] 115/120 239/250 597/625 954/1000 1145/1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 1.6 Thermal Resistance Juncti on to Case (Rjc) [C/W] 1.48 1.02 0.63 0.31 0.28 Maximum I t for Fusing 50/60Hz (1/2 cycle) [A sec] 66/60 285/259 1779/1621 4555/4150 6560/5976 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 0.5 Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. ObsoletePanel Mount Datasheet INPUT SPECIFICATIONS (1) Description PREFIX CSE Control Voltage Range 15-32 VDC Minimum Turn-On Voltage 15.0 VDC Minimum Turn-Off Voltage 1.0 VDC Typical Input Current 7 mA @15 V Nominal Input Impedance 2k Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.0 oz (86.5 g) Encapsulation Thermally conductive Epoxy Terminals Srews and Saddle Clamps Furnished, Unmounted Recommended Terminal Screw Torque Range: 6-32 Screws-10 in/lbs. 8-32 & 10-32 Screws - 20 in. lbs. (Screws dry without grease) Fastons: Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect to both pairs GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, for derating curves see page 2. 4) Turn-on time for random turn-on version (-10 sufx) is 0.1ms Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. Obsolete