CX240D5 Sensata

CX Series SIP SSR Ratings of 5A 660 VAC SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 5 A 5 A 5 A 3-15 VDC CX240D5 4-15 VDC CX380D5 CX480D5 15-32 VDC CXE240D5 CXE380D5 CXE480D5 18-36 VAC CXE240A5 90-140 VAC CX240A5 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description CX240x5 CX380x5 CX480x5 Operating Voltage (47-63Hz) Vrms 12-280 48-530 48-660 Transient Overvoltage Vpk 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 500 Maximum Load Current Arms 5 5 5 Minimum Load Current Arms 0.06 0.06 0.06 Maximum Surge Current (16.6ms) Apk 250 250 250 Maximum On-State Voltage Drop Rated Current Vpk 1.4 1.4 1.4 Maximum It for fusing (8.3 msec) A sec 260 260 260 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 HP rating UL 508/IEC60947 HP/KW : 240VAC 0.25/0.18 0.25/0.18 0.25/0.18 HP rating UL 508/IEC60947 HP/KW : 380VAC NA 0.33/0.25 0.33/0.25 HP rating UL 508/IEC60947 HP/KW : 480VAC NA NA 0.5/0.37INPUT SPECIFICATIONS (1) Description CX240Dx CX380/480Dx CXExxxDx CX240A5 CXE240A5 Nominal Voltage 5 VDC 5 VDC 24 VDC 120 VAC 24 VAC Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC Minimum Turn-On Voltage 3.0 VDC 4.0 VDC 15.0 VDC 90.0 Vrms 18.0 Vrms Drop Out Voltage 1.0 VDC 1.0 VDC 1.0 VDC 10.0 Vrms 2.0 Vrms Typical Input Current 15 mAdc 15 mAdc 15 mAdc 10 mArms 10 mArms Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1K Ohm 2.1K Ohm Maximum Turn-On Time msec (3) 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10 Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.4 oz. (11g) Encapsulation Therminally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-On time for random turn-on versions is 0.1 msec (DC Control Models). WIRING DIAGRAM