D1D20L

Panel Mount Datasheet 1-DCL Series Ratings from 7 A to 40 A 200 VDC and DC control from 7 A to 10 A 500VDC EMC Compliant to Level 3 Mosfet Output Epoxy Free Design UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Load Voltage 7 A 10 A 12 A 20 A 40 A 100 VDC D1D07L D1D12L D1D20L D1D40L 200 VDC D2D07L D2D12L D2D40L 400 VDC D4D07L D4D12L 500 VDC D5D07L D5D10L AVAILABLE OPTIONS Operating Voltage Termination 1D: 1-100 VDC Blank: Screws & clamps 2D: 1-200 VDC K: Installed standoffs with 4D: 1-400 VDC screws for PC Board Series 5D: 1-500 VDC mounting (1) L K D 1D 07 Rated Load Current 07: 7 Amps 10: 10 Amps (500 VDC only) 12: 12 Amps (not for 500 VDC) Required for valid part number 20: 20 Amps (100 VDC only) For options only and not required for valid part number 40: 40 Amps (100 & 200 VDC only) Not all part number combinations are available. * Contact Crydom Technical Support for information on the availability of a specific part number. (2) OUTPUT SPECIFICATIONS Description 7 A 12 A 20 A 40 A 7 A 12 A 40 A 7 A 12 A 7 A 10 A Recommended Operating Voltage Vdc 1-72 1-72 1-72 1-72 1-150 1-150 1-150 1-300 1-300 1-385 1-385 Absolute Maximum Rating Vdc 100 100 100 100 200 200 200 400 400 500 500 Maximum Off-State Leakage Current Rated Voltage mA 0.1 0.2 0.3 0.3 0.1 0.3 0.3 0.3 0.3 0.2 0.3 Maximum Load Current Adc (3) 7 12 20 40 7 12 40 7 12 7 10 Minimum Load Current mA (4) 1 1 1 1 1 1 1 1 1 1 1 Maximum Surge Current (10msec) Adc 23 28 42 106 22 31 106 18 36 19 29 Maximum On-State Voltage Drop Rated Current Vdc 0.5 0.9 0.8 1 1.5 0.7 0.8 2.3 2.6 3.5 3.3 Maximum On-State Resistance RDS-ON Ohms 0.07 0.072 0.039 0.025 0.21 0.062 0.021 0.33 0.22 0.5 0.33 Thermal Resistance Junction to Case (Rjc) C/W 2 2 1.71 0.68 1.24 0.71 0.22 0.56 0.39 0.6 0.43 Minimum Heat Sink for Rated Current 40C C/W 5 3 2 1 3 3 0.7 2 1 1 0.7 Maximum Pulse Width Modulation Frequency Hz (5) 5000 4000 3500 2500 3500 2000 950 1200 900 1100 900 (2) INPUT SPECIFICATIONS Description DC Control Control Voltage Range 3.5-32 VDC Maximum Reverse Voltage -32 VDC Minimum Turn-On Voltage (6) 3.5 VDC Must Turn-Off Voltage 1 VDC Minimum Input Current (for on-state) 10 mA Maximum Input Current 15 mA Nominal Input Impedance Current Regulated Maximum Turn-On Time sec 100 Maximum Turn-Off Time sec 100 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 100 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.66 oz (75.5 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 11,545,504 hours (1,317 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V * * V Load Load - + + Recommended Wire Sizes Wire Size Wire Pull-Out Terminals (Solid / Stranded) Strength (lbs) N 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input +2 +2 1 OUTPUT 1 OUTPUT 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 S OL I D S T A T E R EL A Y S OL I D S T A T E R EL A Y 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 4 INPUT +3 4 INPUT +3 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 110 490 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 + + V V - - EQUIVALENT CIRCUIT BLOCK DIAGRAMS Input Current vs Input Voltage Standard Regulated DC Inputs 14 +DC 33 22 +DC 12 10 Control Trigger 8 Circuit Circuit 6 4 -DC 44 11 -DC 2 0 0 5 10 15 20 25 30 35 DC Input Voltage Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. Input Current (mA)