PCB Mount Datasheet GA8 Series Ratings of 3.5 and 5 Amps 24-280 VAC UL Recognized/Horse Power Rated (E46203) 4kV Optical Isolation Zero Voltage Turn-on Industry Standard SIP Package Form A Output CE compliant PRODUCT SELECTION Control Voltage 4A 5A 3-28 VDC GA8-6B02, 84065131 GA8-6D05, 84065030 (1) INPUT SPECIFICATIONS Description 4A 5A Minimum Turn-On Voltage VDC 3.0 3.0 Maximum Input Voltage VDC 28 28 Must Turn-Off Voltage VDC 1.0 1.0 16 16 Maximum Input Current mADC (2) Current Regulated Current Regulated Nominal Input Resistance (3) OUTPUT SPECIFICATIONS Description 4A (10) 5A Nominal Line Voltage Vrms 240 240 Minimum Line Voltage Vrms 24 24 Maximum Line Voltage Vrms 280 280 600 600 Maximum Peak Off-State Voltage Vpeak (4) 200 200 Static (Off-State) dv-dt V/Sec Maximum On-State Current Arms (5) 4 5.0 .05 Minimum On-State Current Arms .05 Minimum 1-Cycle Surge Apeak (6) 100 100 1.6 On-State Voltage Drop Vpeak (7) 1.6 .1 .1 Maximum Off-State Leakage mArms (8) 1/4 1/4 HP Rating HP (11) (1) GENERAL SPECIFICATIONS Description Parameters Ambient Operating Temperature Range (3) -30 to 80C Ambient Storage Temperature Range -40 to 100 C 1/2 Cycle Response Time (12) Dielectric Strength, Input Output (9) 4000 Vrms Capacitance Input to Output (Typ) 8 pF Line Frequency Range 47 to 63 Hz GENERAL NOTES (1) Specications apply to Ta of -30C to 80C unless otherwise noted. (2) At maximum input voltage. (3) Does not include IRED impedance (drop). (4) One minute maximum duration when applied as a DC Voltage. (5) Derate 50 mA/C from 40C to 80C UL rating is 3.5 Arms. (6) At Ta of 25C, non-repetitive. (7) At Ta of 25C, and maximum on-state current. (8) At Ta of 25C, and maximum line voltage. (9) At Ta of 25C, for one second. (10) Instantaneous turn-on versions available. Specify by adding sufx R to appropriate part number. Contact factory for additional details. (11) For GA8 only, 1/4 H.P. at 240 VAC, 1/8 HP at 120 VAC (12) At 60 Hz 100 sec for Instantaneous Turn-on (sufx R) models. Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.PCB Mount Datasheet MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 0.042 (1.1) DIA 1.7 (43.2) 0.3 (7.6) 0.7 (17.8 1.2 (30.5 1.4 (35.6 EQUIVALENT CIRCUIT DIAGRAM THERMAL DERATE INFORMATION GA8 5A 10 9 8 7 6 5 4 3 2 1 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 TEMPERATURE DEGREE (C) AGENCY APPROVALS E46203 Rev. 090516 Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. AMP. A rms 0.245 (6.2) 0.4 (10.2) 0.035 (.89) 0.1 (2.5) 1.0 (25.4)