H12D4840D

Panel Mount DataSheet DUAL Series Independently controlled dual output solid-state relay Ratings from 25A to 40A 24-530 VAC Industry standard package SCR output for heavy industrial loads DC Control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION 25 A Control Voltage 40 A 4-15 VDC Control D2425D D2440D D2425DE D2440DE 15-32 VDC Control H12D4825D 4-15 VDC Control H12D4840D H12D4825DE H12D4840D 15-32 VDC Control AVAILABLE OPTIONS Output Current Thermal Pad 25: 25 Amps Blank: Not Included H: Included 40: 40 Amps Series H12D48 25 D H -10 Switching Mode Control Voltage Output Voltage Blank: Zero Voltage Turn-On D: 4-15 VDC D24: 24-280 VAC -10: Random Turn-On DE: 15-32 VDC H12D48: 48-530 VAC Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description D2425xx D2440xx H12D4825xx H12D4840xx Operating Voltage (47-63Hz) Vrms 24-280 24-280 48-530 48-530 600 600 1200 (2) 1200 (2) Transient Overvoltage Vpk Maximum Off-State Leakage Current Rated Voltage mArms 10 10 10 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 500 500 500 Maximum Load Current Arms (4) 25 40 25 40 0.15 0.15 0.15 0.15 Minimum Load Current Arms 239/250 597/6250 239/250 597/625 Maximum 1 Cycle Surge Current (50/60Hz) Apk 1.6 1.6 1.6 1.6 Maximum On-State Voltage Drop Rated Current Vpk 1.02 0.63 1.02 0.63 Thermal Resistance Junction to Case (Rjc) C/W 285/259 1779/1621 285/259 1779/1621 Maximum 1/2 Cycle It for Fusing (50/60 Hz) A sec 0.5 0.5 0.5 0.5 Minimum Power Factor (with Maximum Load) FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet INPUT SPECIFICATIONS (1) Description D24XXD H12D48XXD E-SUFFIX Control Voltage Range 4-15 VDC 4-15 VDC 15-32 VDC Minimum Turn-On Voltage 4.0 VDC 4.0 VDC 15.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC Typical Input Current 5 VDC ( 24 VDC for E-Sufx) 13 mA 13 mA 15 mA Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm Maximum Turn-On Time msec (5) 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.0 oz (86.5g) Encapsulation Thermally Conductive Epoxy Terminals .25 Fastons, .025 Square Pins GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) For option (-10) models the Transient overvoltage is 1100Vac. (3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (4) Heat sinking required, for derating curves see next page. (5) Turn-on time for random turn-on (-10) versions is 0.1 msec MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 120/240V MODEL 480V MODEL 1.17 FASTON MOUNTING (29.7) .250 x .032 FASTON MOUNTING HOLE/SLOT TERMINAL HOLE/SLOT 1.00 TERMINAL .0192 (4.9) DIA250 X .032 0.192 (4.9) DIA. (25.4) (4 PLACES) 2 PLCS (4 PLACES) 1.87 1.60 2.30 1.87 2.30 PIN .025 SQ. (47.5) (40.6) (58.4) (47.5) (58.4) .100 CENTERS 4 PLACES .73 0.60 .85 (18.5) (15.2) .77 .85 .187 x .032 (21.6) .45 (19.6) (21.6) (11.5) FASTON 1.21 1.31 1.78 TERMINAL (30.6) 1.37 (33.2) (45.3) (4 PLACES) (34.8) 1.31 (33.2) 1.80 (45.7) Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.