HS202DR-D2450 Sensata

HS202DR Series Assemblies 35 amp AC output 40C Single Channel output AC or DC input control voltage DIN Rail mounted UL, CSA, VDE, CE approved SSRs PRODUCT SELECTION Description 35 A 35 A 3-32 VDC Control HS202DR-D2450 HS202DR-HD6050 OUTPUT SPECIFICATIONS (1) Description HS202DR-D2450 HS202DR-HD6050 Operating Voltage (47-63Hz) Vrms 24-280 48-660 Transient Overvoltage Vpk 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 Maximum Load Current Arms 35 35 Minimum Load Current Arms 0.04 0.04 Maximum Surge Current (16.6ms) Apk 625 625 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.7 Maximum It for Fusing (8.3 msec) A sec 1620 1620 Minimum Power Factor (with Maximum Load) 0.5 0.5 INPUT SPECIFICATIONS (1) Description HS202DR-D2450 HS202DR-HD6050 Control Voltage Range 3-32 VDC 3-32 VDC Minimum Turn-On Voltage 4.0 VDC 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Maximum Reverse Voltage 32 VDC 32 VDC Typical Input Current 3.4 mA 5 VDC 2.0 mA (3) Nominal Input Impeadance 1500 Ohms (3) Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125C Status Indicator Display None Weight (typical) 0.96 lb. (437g) Encapsulation Themally Conductive Epoxy Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Thermal pad installed Yes GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter (HD model only) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. E116949 (D2450) E116950 (HD6050) LR81689 10143 UG Rev. 110811