SDI2415 Sensata

PCB Mount DataSheet SDI Series 16 Pin DIP SSR Ratings to 1.5A 280 VAC SCR output Current control input Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 1.5 A 1.5 A 10-35mA SDI2415 SDI2415R AVAILABLE OPTIONS Operational Voltage 24: 24-280 VAC Output Function Blank: Zero-Cross Series R: Random Turn-On 24 15 R SDI Series Load Current: SDI: 10-35mA Input 15: 1.5 Amps Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description Operating Voltage (47-63Hz) Vrms 12-280 Transient Overvoltage Vpk 600 Maximum Off-State Leakage Current Rated Voltage mA 0.01 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 1.5 Maximum Load Current Arms (3) Minimum Load Current Arms 0.025 Maximum Surge Current (16.6ms) Apk 30 1.2 Maximum On-State Voltage Drop Rated Current Vpk 0.5 Minimum Power Factor (with Maximum Load) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet (1) INPUT SPECIFICATIONS Description SDI Control Voltage Range - Control Current Range 10-32 mA Must Turn On Voltage - Must Turn On Current 10 mA Must Turn Off Voltage - 1.0 mA Must Turn Off Current Typical Input Current 5 VDC - Nominal Input Impedance Ohm - Maximum Turn-On Time msec (4) 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) (2) 3750 Vrms 9 Minimum Insulation Resistance ( 500 V DC) (2) 10 Ohms Maximum Capacitance, Input/Output 2.0 pF Ambient Operating Temperature Range -30C to 80C Ambient Storage Temperature Range -30C to 125C Weight (typical) 0.10 oz. (2.9g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Dielectric and insulation resistance are measured 3) Off-State dv/dt test method per EIA/NARM standard RS-443 WIRING DIAGRAM 16 10 + AC INPUT OUTPUT - AC 1 8 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.