SDI2415R

SDI Series 16 Pin DIP SSR Ratings to 1.5A 280 VAC SCR output Current control input Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 1.5A 1.5A 10-35mA SDI2415 SDI2415R AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) Vrms 12-280 Transient Overvoltage Vpk 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.01 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 Maximum Load Current Arms (3) 1.5 Minimum Load Current Arms 0.025 Maximum Surge Current (16.6ms) Apk 30 Maximum On-State Voltage Drop Rated Current Vpk 1.2 Minimum Power Factor (with Maximum Load) 0.5INPUT SPECIFICATIONS (1) Description SDI Control Voltage Range - Control Current Range 10-32 mA Must Turn On Voltage - Must Turn On Current 10 mA Must Turn Off Voltage - Must Turn Off Current 1.0 mA Typical Input Current 5 VDC - Nominal Input Impedance - Maximum Turn-On Time msec (4) 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(2) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC)(2) 10 Ohm Maximum Capacitance, Input/Output 2.0 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) 0.10 oz. (2.9g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Dielectric and insulation resistance are measured 3) Off-State dv/dt test method per EIA/NARM standard RS-443