TP03 Sensata

Heat Transfer Pad Easy-to-use thermal interface Material designed for use with Standard Crydom single-phase and three-phase solid-state relays. Excellent alternative to thermal grease Adhesive on one side, removable protective film on reverse side (1) TP01 For use with all single phase Panel mount SSRs, Control modules and M50 power modules. TP03 All Three phase (53TP) SSRs. TYPICAL PROPERTIES Description TP01/TP03 Color Pink Thickness, inch (mm) 0.005 (0.13) Adhesive One Side Yes Thermal Impeadance C-in/W 0.03 50 psi Apparent Thermal Conductivity W/m-K 0.7 Phase-Change Temperature C 58 Operating Temperature Range C -60 to 125 15 Volume Resistivity ohm-cm 10 Ohm Specific Gravity 1.11 Suggested Heatsink Clamping Pressure, psi (MPa) 5 to 100 (0.035 to 0.690) MECHANICAL SPECIFICATIONS (1) Protective film must be removed from the pad prior to installation of SSR onto heatsink. Failure to remove film may result in relay failure. Rev. 112310