SEPA RADIAL FAN HY 60Q05AP HIGH PERFORMANCE FAN AIR PERFORMANCE SHAPE AND DIMENSIONS Pa 100 75 50 25 0 0 20 40 60 80 l/min Air Performance PERFORMANCE HY 60Q05AP Operating Voltage VDC 4.5 ... 5.0 ... 5.5 Typ. Operating Current mA 140 Max. Start Current mA 400 3 Max. Air Flow l/min - m /h 78 4.69 Max. Pressure mmH O - Pa 10.7 105 2 Noise 1m (typ.) dB(A) 28 Operating Temperature C -10 +60 Typ. Rotor Speed RPM 4400 FG Output PPR 2 PWM Signal (Frequency, Duty Cycle) VDC 0.7 2.5 (23KHz, 30100%) Life Expectancy L /MTBF h 75000/225000 20C 10 Bearing System Magfix Sleeve Bearing Weight g 18 Packing Quantity Pc 50-500 This SEPA high-tech miniature fan is suitable for industrial and has a remarkable air flow performance despite its small dimensions. The air intake is on the top and on the bottom side, the air exit is on the side. The fan is permanently electrically protected against reverse polarity, blocking and thermal overloading. Due to the low rotor weight and precision balancing, it is virtually vibration-free. It is also insensitive to shock. Further features of this fan are its extremely robust and torsionally stiff housing of PBT (UL E54695) with metal base, long-life-sleeve bearing with very high oil volume, polyester-based PCB (UL E44247) and ab- solute reliability due to a 100% burn-in. SEPA EUROPE GmbH D-79108 FREIBURG Tel: +49(0)761 3842273 0 Fax: +49(0)761 3842273 99 11.14 Subject to technical changes Air Pressure Wires AWG28 blk=GND, red=+VCC (yel=FG) ALAR OUTPUT The SEPA -fan HY 60Q05AP includes a speed impulse output (FG) which enables monitoring the correct function of the fan. The pulse is like a rectangular wave, the frequency correlates to 2 x rotor speed. At blocked rotor the output signal could be L ( 0,2V) or H (Vcc). IMPORTANT: The pulse output is not protected against short circuit and must not connect to GND or Vcc without pre-resistor. A pull-up-resistor is needed. The SEPA -fan HY 60QAP has a PWM control input (L=0.7Vmax H=2.5...Vcc f=23 kHz). Start-up PWM duty percentage 35% min, frequency of PWM duty cycle 23 KHz, range of PWM duty cycle 35100%. Do not inputs a PWM input signal if the fan power supply is off Otherwise the fan will be destroyed. Please follow the handling instructions. The fan has tinned lead wire ends (without connector). FAN ALARME-CIRCUIT OUTPUT SIGNAL HY 60Q05QAP rt + + ge (5mA max.) T 1n sw - - Run: T=6.8msec L=0.2Vmax H=Vcc Stop: H or L ACCESSORIES: CONNECTOR: on request ORDER INFORMATION: HY 60Q05AP SEPA Radial fan, 60x60x12.5mm, 5VDC, Long-Life-Sleeve bearing, CE 1060Q1040 SEPA is the brand name for fans and CPU-Cooler, made by Nippon Keiki Works LTD., Tokyo SEPA EUROPE GmbH D 79108 FREIBURG Tel: +49(0)761 3842273 0 Fax: +49(0)761 3842273 99 11.14 Technical changes without notice