GP1S53VJ000F Gap : 5mm, Slit : 0.5mm GP1S53VJ000F Phototransistor Output, Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1S53VJ000F is a standard, phototransistor output, 1. Compliant with RoHS directive transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For Applications this family of devices, the emitter and detector are insert- 1. General purpose detection of object presence or mo- ed in a case, resulting in a through-hole design. tion. 2. Example : Printer, FAX, Optical storage unit Features 1. Transmissive with phototransistor output 2. Highlights : Vertical Slit for alternate motion detection 3. Key Parameters : Gap Width : 5mm Slit Width (detector side) : 0.5mm Package : 13.7105.2mm 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A02601FEN 1 Date Oct. 3. 2005 SHARP CorporationC1 GP1S53VJ000F Internal Connection Diagram Top view 3 2 1 Anode 2 Cathode 3 Collector 4 1 4 Emitter Outline Dimensions (Unit : mm) Top view +0.3 13.7 0.3 +0.2 5 0.1 Model. No. SHARP mark A-A section B-B section 0.5 0.5 A B Date code (Both side) B +0.3 A 0.45 0.1 +0.3 0.4 0.1 (10.3) (2.54) 4 1 3 2 Unspeci ed tolerance shall be as follows Dimensions (d) Tolerance d 6 0.1 6<d18 0.2 ( ) : Reference dimensions Product mass : approx. 0.5g Dip soldering material : Sn 3Ag 0.5Cu Sheet No.: D2-A02601FEN 2 MIN. 10 3.5 10 7.5 5.2 (2.5) (Detctor center) 1.5 S53