GP1S59J0000F Gap : 4.2mm, Slit : 0.5mm GP1S59J0000F Phototransistor Output, Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1S59J0000F is a standard, phototransistor output, 1. Compliant with RoHS directive transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For Applications this family of devices, the emitter and detector are insert- 1. General purpose detection of object presence or mo- ed in a case, resulting in a through-hole design. tion. This device is unique because it has a horizontal slit 2. Example : Printer, FAX, Optical storage unit and a position pin to insure accurate placement on the PCB and prevent miss-orientation. Features 1. Transmissive with phototransistor output 2. Highlights : Horizontal Slit for alternate motion detection Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 4.2mm Slit Width (detector side): 0.5mm Package : 13.59.35.2mm 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A02901FEN 1 Date Oct. 3. 2005 SHARP CorporationC1 GP1S59J0000F Internal Connection Diagram Top view 3 2 1 3 Anode Collector 2 4 Cathode Emitter 4 1 Outline Dimensions (Unit : mm) Top view Model No. SHARP mark 0.3 13.5 0.2 4.2 AA section BB section A B Date code (Both side) B A (10) (2.54) 4 1 3 2 1.8 Unspeci ed tolerance shall be as follows Dimensions (d) Tolerance d4 0.1 4 d 18 0.2 < ( ) : Reference dimensions Product mass : approx. 0.5g Dip soldering material : Sn 3Ag0.5Cu Sheet No.: D2-A02701FEN 2 MIN 10 0.5 6.8 5.2 1.3 0.2 2 9.3 1.65 0.5 S59