GP2A240LCS0F Sharp

GP2A200LCS0F Series Detecting Distance : 2 to 22mm GP2A200LCS0F *OPIC Output, Re ective Photointerrupter with Series Connector Description Agency approvals/Compliance GP2A200LCS0F Series are OPIC output, reflective 1. Compliant with RoHS directive photointerrupters with emitter and detector facing the same direction in a molding that provides non-contact Applications sensing. This family of devices uses light modulation to 1. General purpose detection of paper presence or mo- reduce the affects of disturbing light, and the sensor is tion. optimized to work in the selected focal distance. A 3-pin 2. Example: PPC, FAX, Printer connector is included to allow remote-mount or off-board designs. Features 1. Re ective with OPIC Light Modulated Output 2. Highlights : Includes additional screw xing holes Position pin to prevent mis-alignment Long focal distance 3. Key Parameters : Detecting distance : 2 to 22mm (White paper) 5 to 15mm (Black paper) Undetecting distance : over 90mm (White paper) Connector : GP2A200LCS0F Tyco Electronics AMP K.K. (PN : 292133-3) GP2A200LCSCF Tyco Electronics AMP K.K. (PN : 292133-3) GP2A240LCS0F Tyco Electronics AMP K.K. (PN : 292133-3) GP2A210LCSJF Tyco Electronics AMP K.K. (PN : 4-292133-3) 4. RoHS directive compliant *OPI(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal- processing Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A05101FEN 1 Date Jun. 30. 2005 SHARP CorporationGP2A200LCS0F Series Internal Connection Diagram Demodulator circuit Reflective object 1 Voltage regulator 1 V CC 2 2 V OUT 3 GND Amp. 3 Comparator Oscillator circuit Sync. detecting circuit Outline Dimensions (Unit : mm) GP2A200LCS0F GP2A200LCSCF 33 (6.8) View A 3.1 17.7 3.2 6.2 6 Optical center 3.5 Connector : 292133-3 1 V 12 CC 5.2 (Tyco Electronics AMP K.K.) 2 V OUT 1 V 7.8 CC Connector : 292133-3 (Tyco Electronics AMP. K. K) 12 3 GND 2 V 5.2 6 OUT 3 3 GND +0 3 0.2 1 2 3 +0.0 2 Optical center 3 0.2 26.5 1 10.2 2 3.5 26.5 32 0 7 Unspeci ed tolerance Unspeci ed tolerance shall be as follows 4-SR1 shall be as follows View A (6.8) Date code Dimensions Tolerance Dimensions Tolerance 02 less than 6 0.2 less than 6 0.2 6 or more 6 or more Date code 0.3 0.3 less than 14 less than 14 14 or more 0.4 14 or more 0.4 *( ) : Reference dimensions *( ) : Reference dimensions Product mass : approx. 1.95g Product mass : approx. 2.3g GP2A210LCSJF GP2A240LCS0F 33 (6.8) 33 (6.8) 3.1 17.7 3.1 17.7 1 1 V V CC CC 2 2 V 6.2 6 V OUT 3.2 OUT 3.2 6.2 6 Optical center Optical center 3 3 GND GND 12 12 Connector : 292133-3 Connector : 4-292133-3 (Yellow) 7.8 (Tyco Electronics AMP K.K.) 7.8 (Tyco Electronics AMP K.K.) +0.0 3 0.2 +0.0 3 0.2 26.5 1 2 3 1 2 3 26.5 Unspeci ed tolerance Unspeci ed tolerance 51 shall be as follows shall be as follows 99 Dimensions Tolerance Dimensions Tolerance Date code Date code less than 6 0.2 less than 6 0.2 6 or more 6 or more 0.3 0.3 : Portion Built-in IR-90 lter less than 14 less than 14 14 or more 0.4 14 or more 0.4 Product mass : approx. 1.95g Product mass : approx. 1.95g *( ) : Reference dimensions *( ) : Reference dimensions Connector terminal plating material : Sn Sheet No.: D3-A05101FEN 2 3.2 8 9 8 9 4.5 4.5 4.5 4.5 2.5 2.5 (0.9) (0.65) (5.8) (7.8) (5 .8) (7.8) 2 2 8 9 9 9.6 4.5 4.5 7 2.5 4.5 3.5 (7.8) 7.8 6.1 (0.65) (5 .8) (7.8) (5.8) 2 2