GP2Y0D815Z0F GP2Y0D815Z0F Distance Measuring Sensor Unit Digital output (150 mm) type Description Agency approvals/Compliance GP2Y0D815Z0F is distance measuring sensor unit, 1. Compliant with RoHS directive (2002/95/EC) composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration Applications are not influenced easily to the distance detection because of adopting the triangulation method. 1. Touch-less switch The output voltage of this sensor stays high in case (Sanitary equipment, Control of illumination, etc.) an object exists in the specified distance range. So 2. Robot cleaner this sensor can also be used as proximity sensor. Features 1. Digital output type 2. Short distance type Detecting distance : Typ. 150 mm 3. Low profile Package size : 13.677.95 mm 4. Consumption current : Typ. 5 mA 5. Battery drive compatible Supply voltage : 2.7 to 6.2 V 6. Sunlight tolerance 7. Add Vin terminal, and an external transistor of Vcc line is unnecessary at intermittent operating. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: OP14005EN 1 GP2Y0D815Z0F Outline Sheet No.: OP14005EN 2