ZM2102 Datasheet Integrated Z-Wave RF Module The ZM2102 Z-Wave Module is a fully integrated RF Features communication module that uses the unlicensed Short-Range- Device (SRD) frequency band of 868.42MHz in Europe and Interfaces 908.42MHz in US. The ZM2102 is dedicated for wireless control 10 General Purpose I/Os and monitoring of residential products like lighting and appliance Two Interrupt Inputs control, energy management, access control, security and building Serial UART automation. SPI Interface Triac Control Interface Together with the patented Z-Wave Protocol the ZM2102 Z-Wave PWM Output Module delivers a complete highly reliable RF communication Four multiplexed 12/8 bit solution. The Z-Wave Protocol uses Frame Acknowledgement, ADC inputs Retransmission, Collision Avoidance, Frame Checksum Check and ZW0201 Single Chip sophisticated Routing to assure reliable full home coverage. Optimized 8051 CPU Core 32kbyte Flash 2kbyte SRAM Power-On-Reset / Brown- Out Detection Supply Voltage: 2.1V-3.6V Power Consumption o TX -5dBm = 24mA o TX 0dBm = 36mA o RX = 23mA o Power down/sleep mode = 2.5A RF Freq: 908.42MHz (US) / 868.42MHz (EU) High Sensitivity (-102/-98dBm) FSK Modulation 9.6kbps/40kbps Data Rate The ZM2102 Z-Wave Module contains the integrated ZW0201 -20dBm to 0dBm Output Z-Wave Single Chip, system crystal and RF front-end circuitry. The power (ZW0201) ZW0201 Single Chip is an integrated chip containing RF Complies with EN 300 220 and FCC CFR47 part 15 Transceiver, 8051 MCU core, SRAM, Flash Memory for Z-Wave Protocol and OEM Application software storage, Triac Controller Applications and a wide range of HW interfaces. Home Automation o Lighting/Drape Control This complete RF solution makes it very easy for OEM customers o Automated Meter Reading to RF enable their products without having to do the time o Access Control consuming work of designing, verifying and optimizing the RF o Universal Remote design and thereby enables faster time to market. Controls Zensys A/S Page 1 of 14 DSH10229-11-11 ZM2102 Z-Wave Module Datasheet 2006-11-10 Table of Contents 1 PRODUCT DESCRIPTION...................................................................................................................3 1.1 Overview................................................................................................................................................3 1.2 Signal Description..................................................................................................................................4 1.3 RF Front-End.........................................................................................................................................5 1.3.1 RF input/output ...........................................................................................................................5 1.3.2 Antenna Matching.......................................................................................................................5 1.4 Z-Wave Module Programming ..............................................................................................................6 2 SPECIFICATIONS ................................................................................................................................7 2.1 ZW0201 Specification ...........................................................................................................................7 2.2 ZW0201 Single Chip Peripherals ..........................................................................................................7 2.3 RF Specification ....................................................................................................................................7 2.4 Electrical Specification ..........................................................................................................................8 2.4.1 Absolute Maximum Ratings........................................................................................................8 2.4.2 DC Characteristics......................................................................................................................8 2.5 Physical Specification............................................................................................................................9 2.6 Process Specification ............................................................................................................................9 2.7 Recommended PCB Footprint Outline................................................................................................10 2.8 Recommended Reflow Profile.............................................................................................................11 2.9 Application PCB Layout Recommendation .........................................................................................11 2.9.1 Supply Voltage .........................................................................................................................11 2.9.2 Ground Plane ...........................................................................................................................12 2.9.3 Antenna Interconnection...........................................................................................................12 3 SOFTWARE........................................................................................................................................13 3.1 SPI Interface........................................................................................................................................13 3.2 EEPROM.............................................................................................................................................13 4 REFERENCES....................................................................................................................................14 Zensys A/S Product Description Page 2 of 14 CONFIDENTIAL