EZRadioPRO-DK EZRADIOPRO DEVELOPMENT KITS USERS GUIDE 1. Kits Overview This user s guide describes the development kits of the EZRadioPRO wireless development kit family. Each kit contains two RF nodes based on the Wireless Motherboard to support evaluation and development of sub-GHz RF links with the different EZRadioPRO devices. Table 1 lists the RF pico boards of the kits that use the latest C2A revision of the EZRadioPRO ICs. Table 2 lists the RF pico boards of the obsolete kits that use the previous B1B revision of the EZRadioPRO ICs. Table 3 lists the content that is common to all kits. Table 1. RF Pico Boards of the EZRadioPRO Development Kits Qty Description Part Number 4461C-868-PDK Si4461 Development Kit 868 MHz 2 4461CPCE14D868-EK Si4461 RF Transceiver Pico board 868 MHz, 14 dBm, direct tie 4438C-490-PDK Si4438 Development Kit 490 MHz 2 4438CPCE20D490-EK Si4438 RF Transceiver Pico board 490 MHz, 20 dBm, direct tie 4463C-915-PDK Si4463 Development Kit 915 MHz 2 4463CPCE20C915-EK Si4463 RF Transceiver Pico board 915 MHz, 20 dBm, switched Table 2. RF Pico Boards of the obsolete EZRadioPRO Development Kits Qty Description Part Number Si4060/Si4362 Development Kit 868 MHz 4060-868-PDK 1 Si4060 RF Transmitter Pico Board 868 MHz, 10 dBm 4060-PCE10B868-EK 1 Si4362 RF Receiver Pico Board 868 MHz 4362-PRXB868-EK Si4063/Si4362 Development Kit 915 MHz 4063-915-PDK 1 Si4063 RF Transmitter Pico board 915 MHz, 20 dBm 4063-PCE20B915-EK 1 Si4362 RF Receiver Pico board 915 MHz 4362-PRXB915-EK Si4461 Development Kit 868 MHz 4461-868-PDK 2 Si4461 RF Transceiver Pico board 868 MHz, 14 dBm, direct tie 4461-PCE14D868-EK Si4438 Development Kit 490 MHz 4438-490-PDK 2 Si4438 RF Transceiver Pico board 490 MHz, 20 dBm, direct tie 4438-PCE20D490 Si4463 Development Kit 915 MHz 4463-915-PDK 2 Si4463 RF Transceiver Pico Board 915 MHz, 20 dBm, switched 4463-PCE20C915-EK Table 3. Content Common to Every Kit Qty Description Part Number 2 Wireless Motherboard MSC-WMB93X 2 C8051F930 MCU Pico Board UPPI-930-RF 2 USB cable (USBA-USB mini) 2 Antenna with SMA connection MSC-AT50-XXX 1 Kit user guide Rev. 0.5 9/14 Copyright 2014 by Silicon Laboratories EZRadioPRO-DKEZRadioPRO-DK 2. Software Setup There are two software tools provided by Silicon Labs to aid in EZRadioPRO software development, the Wireless Development Suite (WDS) and the Silicon Labs Integrated Development Environment (IDE). The recommended starting point for EZRadioPRO development is the WDS software tool. This tool is able to identify the connected boards by reading their identification memories (EBID) and provides valuable help by greatly simplifying radio configuration, evaluation, and application development. 2.1. Hardware and Software Requirements for WDS The following hardware and software is required to run the WDS: Windows XP or later Microsoft .NET framework 3.5 or later Silicon Labs CP210x VCP driver WDS v3.2.7.0 or later The lack of the .NET framework and VCP driver are recognized during the WDS installation. The install wizard will install the missing components after prompting the user for consent. 2.2. Download WDS WDS can be obtained from the Silicon Labs web site free of charge at