X-On Electronics has gained recognition as a prominent supplier of CP2401-GM LCD Drivers across the USA, India, Europe, Australia, and various other global locations. CP2401-GM LCD Drivers are a product manufactured by Silicon Labs. We provide cost-effective solutions for LCD Drivers, ensuring timely deliveries around the world.
We are delighted to provide the CP2401-GM from our LCD Drivers category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the CP2401-GM and other electronic components in the LCD Drivers category and beyond.
CP2400/1/2/3 128/64 SEGMENT LCD DRIVER LCD Driver Digital Bus Interface Controls up to 128 segments (48-pin packages) or 4-wire SPI Interface operates up to 2.5 Mbps with 64 segments (32-pin package) synchronous external clock or up to 1 Mbps with internal clock (CP2400/2 only). Supports static, 2-mux, 3-mux, and 4-mux displays 2 On-chip bias generation with internal charge pump 2-wire SMBus/I C Interface operates up to 400 kHz with Low power blink capability internal clock (CP2401/3 only). Dedicated RST and INT pins. GPIO Expander Optional CLK pin can be used as a CMOS clock input. Expands GPIO count by up to 36 pins (48-pin 2 Optional PWR pin (SMBus/I C devices only) places the packages) or 20 pins (32-pin package) device in a low power mode. SPI devices use the NSS GPIO pins may be configured to push-pull or open-drain pin to place the device in a low power mode. outputs with two drive levels. GPIO may also be used as digital inputs (CP2400/1/2/3 pullups included) Low Power Port Match Capability can wake up host controller using 1.83.6 V operation with integrated LDO interrupt pin Ultra Low Power Mode w/ LCD (<3 A typical) 5 V Tolerant I/O Shutdown current (0.05 A typical) Real Time Clock, SmaRTClock Example Applications Precision time keeping with 32.768 kHz watch crystal Handheld Equipment self-oscillate mode requires no external crystal accepts Utility Meters external 32 kHz CMOS clock Thermostat Display 36-hour programmable counter with wake up alarm Home Security Systems Can wake up the host controller using interrupt pin Low power (<1.5 A) Packages Pb-free 48-pin QFP (9x9 mm footprint) -Q 256 Bytes RAM Pb-free 48-pin QFN (7x7 mm footprint) -M General purpose RAM expands the memory available to Pb-free 32-pin QFN (5x5 mm footprint) host controller. Ordering Part Numbers 16-bit Timers CP2400-G M Q (SPI Interface) Two general purpose 16-bit timers 2 CP2401-G M Q (SMBus/I C Interface) Clock Sources CP2402-GM (SPI Interface) 20 MHz Internal oscillator 2 CP2403-GM (SMBus/I C Interface) Can be clocked from an external CMOS clock Temperature Range: 40 to +85 C Rev. 1.0 8/10 Copyright 2010 by Silicon Laboratories CP2400/1/2/3 CP2400/1/2/3 2 Rev. 1.0