M2400910F Simpson

Mini-Max M240 Temperature Indicator Specifications - DISPLAY Type 7- segment, red LED Height 0.56 (14.2mm) Display resolution 0.1 from -99.9 to 999.9 1.0 below 100 or above 1000 0.1mV for mV indication Overrange Indication The left-most digit shows 1: 1 (other digits are (T/C or mV) blank) Open or faulty input connection ---- Uncalibrated instrument Display will flash continously INFO FAIL CALB REQD upon application of power. Polarity Automatic, with - indication, + indication implied 3/64 DIN Temperature Indicator POWER REQUIREMENTS AC Voltages 85 - 250VAC 50-60Hz Power Consumption 2 VA Jumper selectable display for C / F INPUTS Screw terminals connector for easy Thermocouple J, K Millivolt 70mV (Uncompensated for temperature) installation Lead Resistance Effect -13V / 100 max. Unique mounting bracket allows for RTD Platinum 100 Ohm (.00385 alpha) stacking of multiple meters Lead Resistance Effect 2- and 3- wire 1 / .29 max. Temperature Coefficient 0.2C / C Input Type Temperature Range Accuracy 25C K T/C -100 to 1370C (0.1% rdg +1.5C) -148 to 2498F (0.1% rdg +2.7F) J T/C -100 to 1200C (0.1% rdg +1.5C) -148 to 2192F (0.1% rdg +2.7F) RTD Pt100 (4-wire) -100 to 850C (0.2% rdg +1.5C) -148 to 1562F (0.2% rdg +2.7F) mV -70 to 70mV (0.1% rdg +0.1mV) Input Impedance 22M ENVIRONMENTAL Operating Temperature 0 to 55C Storage Temperature -10 to 60C Relative Humidity 0 to 85% non-condensing Warmup time Less than 20 minutes A/D Conversion Techniques 12 Bit Successive Approximation (SAR) Rate 10 samples per second NOISE REJECTION NMRR 60dB, 50/60Hz CMRR (w / 1k unbalanced 60Hz) 90dB min MECHANICAL Bezel 0.94 x 2.83 Depth 2.36 Panel cutout 0.89 x 2.71 Weight 3.5 oz. (99.2 g) Case Material 94-0, UL-rated, glass-filled thermoplastic 1 Rev. 10-28-13Mini-Max M240 Temperature Indicator Ordering Information - Mini-Max indicators can be configured by making an entry in each section below . Example: M240-0-91-0-F. I I I I I Basic Unit Power Input Output Display Supply Select From Each One Below Basic Unit Input Output M240 4 Digit LED 91 J T/C 0 None 92 K T/C 93 RTD Pt100 Ohm Display Power Supply 94 DC mV C C 0 85-250 VAC F F 0 mV (only available with DC mV Input) Thermocouples can be found in Accessories Dimensions and Panel Cutout - M235, M245 & M240 Mounting Instructions Insert the Mini-Max through the panel, and then slide the mounting bracket on to the Mini-Max. The mounting bracket allows Mini-Max units to be stacked side-to-side or top-to-bottom. Panel cutout instructions for stacking multiple units are provided in the operators manual. 2 Rev. 10-28-13