DATA SHEET AS211-334: 0.1 to 4.0 GHz pHEMT SPDT Switch Applications General purpose switch for telecommunications J3 V2 Features P1dB: +30 dBm typical 3 V IP3: +43 dBm typical 3 V J1 Low insertion loss: 0.3 dB 0.9 GHz Low DC power consumption J2 V1 Small footprint, DFN (6-pin, 1.2 x 1.5 x 0.75 mm) package (MSL1, 260 C per JEDEC J-STD-020) S1614 Skyworks Green products are compliant with Figure 1. AS211-334 Block Diagram all applicable legislation and are halogen-free. For additional information, refer to Skyworks Denition of Green, document number Description SQ04-0074. The AS211-334 is an FET single-pole, double-throw (SPDT) switch for general telecommunications applications. The device features low insertion loss and positive voltage operation with very low DC power consumption. The switch is manufactured in a compact, 1.2 x 1.5 x 0.75 mm, 6-pin Dual Flat No Lead (DFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package 1 V2 J3 6 are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 2 5 GND J1 3 4 J2 V1 Figure 2. AS211-334 Pinout 6-Pin DFN (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200191H Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 19, 2018 1 DATA SHEET AS211-334: SPDT SWITCH Table 1. AS211-334 Signal Descriptions Pin Name Description Pin Name Description 1 J3 RF output 4 V1 Positive control voltage 2 GND Ground 5 J1 RF common/antenna port 3 J2 RF output 6 V2 Positive control voltage Table 2. AS211-334 Absolute Maximum Ratings Parameter Symbol Test Condition Minimum Typical Maximum Units Input power PIN Any frequency >500 MHz, 6 W VCTL = 0/7 V Control voltage VCTL 0.2 +8.0 V Operating temperature TOP 40 +85 C Storage temperature TSTG 65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The state of the AS211-334 is determined by the logic provided in Electrical and Mechanical Specifications Table 4. The absolute maximum ratings of the AS211-334 are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics of the AS211-334 are illustrated in Figures 3 through 5. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 September 19, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200191H