DATA SHEET SKY13335-381LF: 0.1 to 6.0 GHz GaAs SPDT Switch Applications WLAN 802.11 a/b/g networks RFC WLAN repeaters ISM band radios Low power transmit receive systems OUT2 OUT1 Features Positive voltage control Control voltage high = 1.8 to 5.0 V Broadband, 0.1 to 6.0 GHz Very low insertion loss, 0.40 dB typical 2.5 GHz VCTL1 VCTL2 S1527 High isolation, 27 dB typical 2.5 GHz Figure 1. SKY13335-381LF Block Diagram Excellent linearity performance, P1dB = +29 dBm 3 V Ultra-miniature, MLPD (6-pin, 1.5 x 2.0 x 0.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The SKY13335-381LF is a pHEMT GaAs FET I/C switch. The device features low insertion loss and positive voltage operation Skyworks Green products are compliant with with very low DC power consumption. The switch is manufactured all applicable legislation and are halogen-free. in a compact, low-cost 1.5 x 2.0 mm, 6-pin Micro Leadframe For additional information, refer to Skyworks Package Dual (MLPD) package. Denition of Green, document number The switch can be used in transmit/receive applications by SQ04-0074. connecting the RF common port (RFC, pin 5) to either the OUT1 or OUT2 port (pins 1 or 3, respectively) using a low-loss path (i.e., a positive voltage applied to either the VCTL1 or VCTL2 pins). The switch is a reflective short on the isolated port. 1 6 OUT1 VCTL1 A functional block diagram is shown in Figure 1. The 6-pin MLPD package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in GND 2 5 RFC Table 1. 3 4 OUT2 VCTL2 S1526 Figure 2. SKY13335-381LF Pinout 6-Pin MLPD (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201093D Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice August 12, 2014 1 DATA SHEET SKY13335-381LF: SPDT SWITCH Table 1. SKY13335-381LF Signal Descriptions (Note 1) Pin Name Description Pin Name Description 1 OUT1 RF port. Must be DC blocked. 4 VCTL2 DC control voltage. 2 GND Ground 5 RFC RF port. Must be DC blocked. 3 OUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage. Note 1: Exposed paddle must be connected to ground. Typical performance characteristics for the SKY13335-381LF are Electrical and Mechanical Specifications shown in Figures 3 through 7. The absolute maximum ratings of the SKY13335-381LF are provided in Table 2, and recommended operating conditions are The state of the SKY13335-381LF is determined by the logic listed in Table 3. Electrical specifications are provided in Table 4. provided in Table 5. Table 2. SKY13335-381LF Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Typical Maximum Units RF input power: PIN f >500 MHz 5 V +32 dBm f >500 MHz 3 V +31 dBm Operating temperature TOP 40 +85 C Storage temperature TSTG 65 +150 C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY13335-381LF Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units Frequency f 0.1 6.0 GHz Control voltage: Low VCTL L 0 0.2 V High VCTL H 1.8 5.0 V Operating temperature TOP +25 C Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 August 12, 2014 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201093D