LLC710D324-003 SST Sensing

DATA SHEET Liquid Level Switches Optomax Industrial Series FEATURES Liquid level switches that can detect almost any liquid type oil or water based Choice of material Polysulfone (standard) or Trogamid Choice of threads Housing/ Supply Output Temp Output Type / Logic Mounting Voltage Current BENEFITS OUTPUT VALUES 3 High power Output Voltage (Vout): lout = 1A Vs = 4.515.4V Industrial supply voltage DC Output High Vout = Vs - 1.5V max Direct load drive design Output Low Vout = 0V + 0.5V max Output Voltage (Vout): lout = 1A TECHNICAL SPECIFICATIONS Vs = 830V DC Supply voltage (Vs) 4.5V to 15.4V DC DC Output High Vout = Vs - 1.8V max or 8V to 30V DC DC Output Low Vout = 0V + 0.7V max Supply current (ls) 2.5mA max. (Vs = 15.4V ) DC or 7.5mA max. (Vs = 30V ) DC Output sink and source current (lout) 1A Other sensor options available on request, email: technical sstsensing.com Operating temperatures Standard: -25C to +80C Extended: -40C to +125C Storage temperatures Standard: -30C to +85C Need help Ask the expert Extended: -40C to +125C 1, 2 Tel: + 44 (0)1236 459 020 Housing material Polysulfone or Trogamid and ask for Technical Sensor termination 20AWG, 250mm PTFE wires, 8mm tinned 1) Above +85C, Trogamid is suitable for water based liquids. Oil based liquids can cause deformation of the sensing tip and must be tested for compatibility. NOTES 2) Before use check that the fluid in which you wish to use these devices is compatible either with Polysulfone or Trogamid. 3) Voltages applicable to output value stated. OUTLINE DRAWING HOUSING SPECIFICATIONS All dimensions shown in mm. Tolerances = 1mm. Housing Series LLx2x0 Series 2x0 6x0 7x0 M12x1x8g 1/2 SAE with 2 Thread 1/4 NPT 1 1 with hex nut O-ring 3 Pressure 7 bar /101 psi maximum Tightening 1.5 Nm / 13.26 in-lbs maximum Torque LLx6x0 Series ELECTRICAL INTERFACE Wire Designation Red Vs Green Output Blue 0V LLx7x0 Series 1) Hex nut and O-ring sold separately email: technical sstsensing.com for details. NOTES 2) NPT version can be sealed with PTFE tape. 3) When correctly sealed.