DIP05-1C90-51E Standexmeder

Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3205190851 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP05-1C90-51E Coil Data at 20 C Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Coil current Thermal resistance = operating temperature + self heating Inductance Pull-In voltage Drop-Out voltage Contact Data 94 Conditions Min Typ Max Unit % % & Contact rating not to exceed their individual max. s Switching voltage DC or Peak AC Switching current DC or Peak AC Carry current DC or Peak AC ( ) * +% , - . * %. Contact resistance static Start Value ( % . ) & % % Contact resistance dynamic Start Value Contact resistance dynamic Difference value 1,5 ms after excitation Insulation resistance RH <45 %, 100 V test voltage / Breakdown voltage (<21 AT) according to EN 60255-5 Operate time incl. bounce measured with 40% overdrive ) Release time measured with no coil excitation ) Capacity 10 kHz across open switch 0 Special Product Data Conditions Min Typ Max Unit Dielectric Strength Coil/Contact according to EN 60255-5 1 Insulation resistance Coil/Contact RH <45%, 200 VDC measuring voltage 2 Capacity Coil/Contact 10 kHz 0 Housing material epoxy resin Connection pins CuFe2P, tin plated Approval UL-File Nr. NRNT2.E156887 / NRNT8.E156887 Reach / RoHS conformity yes Modifications in the sense of technical progress are reserved Designed at: 20.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 15.02.12 Last Change by: THAUKE Approval at: 15.02.12 Approval by: JHEYDER Version: 3Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3205190851 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP05-1C90-51E Environmental data Conditions Min Typ Max Unit Vibration from 10 - 2000 Hz 3 Operating temperature 5 4 Storage temperature 5 4 Soldering temperature wave soldering max. 5 sec. 6 4 Washability fully sealed General data Conditions Min Typ Max Unit Packaging Tube per 25 pieces Modifications in the sense of technical progress are reserved Designed at: 20.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 15.02.12 Last Change by: THAUKE Approval at: 15.02.12 Approval by: JHEYDER Version: 3