DIP12-1B72-19L Standexmeder

Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3212010019 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP12-1B72-19L Coil Data at 20 C Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Coil current Thermal resistance = operating temperature + self heating Inductance Pull-In voltage Drop-Out voltage Contact data 66/3 Conditions Min Typ Max Unit % & Contact rating not to exceed their individual max. s Switching voltage DC or Peak AC Switching current DC or Peak AC Carry current DC or Peak AC ( ) * + ,- * - Contact resistance static Start Value Insulation resistance RH <45 %, 100 V test voltage . Breakdown voltage ( > 20 AT ) according to IEC 255-5 / Operate time incl. bounce measured with 40% overdrive ) Release time measured with no coil excitation ) Capacity 10 kHz across open switch 0 Special Product Data Conditions Min Typ Max Unit Number of contacts 1 Contact - form B - NC Dielectric Strength Coil/Contact according to IEC 255-5 / Insulation resistance Coil/Contact 40C, 95% R.H Capacity Coil/Contact 10 kHz 0 Case colour black Housing material mineral filled epoxy Connection pins FeNi-alloy tinned Magnetic Shield no Reach / RoHS conformity yes Approval UL File No. NRNT2.E156887 Approval UL File No. NRNT8.E156887 Remark attention coil polarity Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 22.04.04 Last Change by: SCHELLHORN Approval at: Approval by: Version: V1.0Europe: +49 / 7731 8399 0 Email: info meder.com Item No.: USA: +1 / 508 295 0771 Email: salesusa meder.com 3212010019 Asia: +852 / 2955 1682 Email: salesasia meder.com Item: DIP12-1B72-19L Environmental data Conditions Min Typ Max Unit Shock 1/2 sine wave duration 11ms 1 Vibration from 10 - 2000 Hz 1 Operating temperature 4 3 2 Storage temperature 4 2 Soldering temperature wave soldering max. 5 sec. 5 2 Washability fully sealed General data Conditions Min Typ Max Unit Total weigth 1 Packaging Tube per 25 piece Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 22.04.04 Last Change by: SCHELLHORN Approval at: Approval by: Version: V1.0