MK24-A-2 Standexmeder

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet MK24 Reed Sensors MK24 Series Reed Sensors Features: Supplied in Tape & Reel, J-Lead, Excellent for Low Power Operations Applications: On/Off Control Switch, Position Detection, Switching Element & Others Markets: Appliance, Telecommunication, Security, Medical & Others Part Description: MK 24 - 0 - X Magnetic Sensitivity Lead Design A, B, C, D, E 1, 2 , 3 Customer Options Switch Model Unit Contact Data 04 Rated Power (max.) 3 / 1* W Any DC combination of V&A not to exceed their individual max.s Switching Voltage (max.) 30 V DC or peak AC Switching Current (max.) 0.3 / 0.1* A DC or peak AC Carry Current (max.) 0.5 / 0.3* A DC or peak AC Contact Resistance (max.) 200 / 250* mOhm 0.5V & 50mA Breakdown Voltage (min.) 0.1 / 0.06* kVDC According to EN60255-5 Operating Time (max.) 0.25 ms Incl. Bounce Measured with w/ Nominal Voltage Release Time (max.) 0.15 ms Measured with no Coil Excitation Insulation Resistance (typ.) 10 10 Ohm Rh<45%, 100V Test Voltage Capacitance (typ.) 0.1 pF 10kHz across open Switch * Valid for Magnetic Sensitivity Range A USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved. A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet MK24 Reed Sensors Housing and Lead Specifications MK24 Reed Sensor Housing Material Mineral Filled Epoxy Case Color Black Lead design 1 Flat, straight leads for PCB slot mounting Lead design 2 Flat, bent SMD leads Lead design 3 J-Lead Environmental Data Unit Shock Resistance (max.) 30 g 1/2 sine wave duration 11ms 20 g Vibration Resistance (max.) Operating Temperature -40 to 130 C Storage Temperature -50 to 130 C Handling & Assembly Instructions Soldering Temperature (max.) 260 C 5 sec. max. Use proper lead clamping or heat sinking techniques to prevent mechanical and/or heat Glossary Contact Form stress during, soldering, and welding NO = Normally Open Contacts Form A Mechanical shock as the result of dropping the reed SPST = Single Pole Single Throw sensor may cause immediate or post-installation NC = Normally Closed Contacts failure Form B SPST = Single Pole Single Throw Reflow Soldering Conditions according to JEDEC Changeover norm J-STD-020D.1 Form C SPDT = Single Pole Double Throw Glossary Magnetic Sensitivity Life Test Data *Load increase reduces life expectancy of Reed Switches Sens. A B C D E F G AT 05-10 10-15 15-20 20-25 25-30 30-35 35-40 USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved.