SIL24-1A72-71L Standexmeder

SIL Series MEDER electronic Single-In-Line Reed Relays DESCRIPTION Single-In-Line Reed Relays reduce the required space to a minimum. Requiring only half the PCB area of the DIP or DIL series, the SIL relays offer all the advantages of Reed Technology. CHARACTERISTICS FEATURES High resistance coils of up to 2000 at 12 VDC Magnetic shield available Breakdown voltage coil / contact of up to 4.25 kVDC High resistance version Contact form 1A, 1B or 1C Other coil resistances available Option with coax screen for Z=50 Ohm Impedance DIMENSIONS All dimensions in mm inch 20.6 5.9 0.811 0.232 PIN OUT View from top of component, 2.54mm 0.10 pitch grid 71 Form 1A 71 Form 1B 51 Form 1C 113 5 7 35 7 1 2 3 5 7 + + + + by option with diode www.meder.com 198 8.3 0.327 MEDER electronic SIL Series Single-In-Line Reed Relays RELAY DATA Switch Model Switch 31 Switch 72 All Data at 20 C Contact Form Form A Form A Contact Ratings Conditions Min. Typ. Max. Min. Typ. Max. Units Any DC combination of V & A Switching Power not to exceed their individual 50 15 W max.s Switching Voltage DC or peak AC 500 200 V Switching Current DC or peak AC 2 1.0 A Carry Current DC or peak AC 2 1.25 A Static Contact Resistance w/ 0.5 V & 10mA 80 150 m Measured w/ 0.5 V & 50mA , Dynamic Contact Resistance 200 m 1.5 ms after closure Insulation Resistance across Across Contact 11 13 10 10 Contacts Coil - Contact Breakdown Voltage across Across Contact 1500 250 VDC Contact Coil - Contact 2000 1500 Operate Time incl. Bounce Nominal voltage 1.2 0.7 ms Release Time with no coil suppression 1.0 0.1 ms Across Contact 0.3 0.2 Capacitance pF Coil - Contact 2.0 Life Expectance 6 10 Switch Voltage 5V - 10 mA DC <10 pF stray cap. 100 1000 Cycles For other load requirements, see the life test section on P. 120. Environmental Data 1/2 sinus wave duration Shock Resistance 50 50 g 11 ms Vibration Resistance From 10 - 2000 Hz 10 20 g o Ambient Temperature 10C/ minute max. allowable -20 70 -20 70 C o Stock Temperature 10C/ minute max. allowable -35 95 -35 95 C o Soldering Temperature 5 sec. 260 260 C * 600 VDC with 5V coil, 1000 VDC with 12V coil. www.meder.com 199