DIP2450-01D3 STMicroelectronics
DPACKCDROM71 stmicroelectronics Stock : 0
ESD Suppressors / TVS Diodes ESD Protection Stock : 0
RF Wireless Misc Dual Differential Low Pass Filter Stock : 0
Rectifiers 6 Amp 1500 Volt Stock : 0
Development Boards & Kits - 8051 Motor Controller KIT DEV FOR UPSD3400 Stock : 0
uPSD3300 Microcontroller Kit SPI Flash Stock : 4
Signal Conditioning 1.57GHz Dielectric Filter Stock : 0
Signal Conditioning 915MHz Dielectric Filter Stock : 0
Feed Through Capacitors 0603 1000pF +/-20% 16 volt 600mA Stock : 1255
RTVY124EF23OS13 raltron signal conditioning passive components Stock : 0
HALL EFFECT JOYSTICK 2 AXES Stock : 0
Signal Conditioning Filter BP 2.5 GHz WIMAX Stock : 2178
Signal Conditioning LTCC BAND PASS FLTR 2400-2500MHz Stock : 520
Signal Conditioning 2.4GHz W-LAN/Bluetooth Stock : 0
DIP2450-01D3 2 G / 5 G WLAN diplexer Datasheet - production data Features Low insertion loss in pass band High attenuation levels High rejection of out-of-band frequencies 2 Small footprint: < 1.4 mm Benefits Very low profile (<600 m after reflow) Flip Chip package 4 bumps High Q, low loss High RF performance Tight tolerance Bill of materials and area reduction Figure 1. Pin configuration (bump view) Applications WLAN 2 1 Bluetooth Mobile phone application A 2G 5G Wireless networking Description B ANT GND This diplexer targets the use of dual band 2.4 GHz and 5 GHz. The DIP2450-01D3 is a diplexer dedicated to the WLAN/BT application. It is designed using STMicroelectronics IPD (integrated passive device) technology on non conductive glass substrate to optimize RF performance. May 2014 DocID023193 Rev 2 1/10 This is information on a product in full production. www.st.com Obsolete Product(s) - Obsolete Product(s)Characteristics DIP2450-01D3 1 Characteristics Table 1. Absolute rating (limiting values) Value Symbol Parameter Unit Min. Typ. Max. P Average power 27 dBm AV ESD ratings: V ESD 400 MIL STD883C (HBM:C = 100 pF, R = 1.5 k, air discharge) antenna V and 2G Charged device model (CDM) 500 ports Machine model (MM: C = 200 pF, R = 25 , L = 500 nH) 100 T Operating temperature range -40 +85 C OP Table 2. Electrical characteristics and RF performance (T = 25 C) amb Value Symbol Parameter Test condition Unit Min. Typ. Max. Pass band 2 G band pass 2400 2483.5 MHz f 5 G band pass 4900 5850 MHz Z Nominal impedance 50 Return loss All ports -17 dB S21 2 G to antenna insertion loss 2400 to 2483.5 MHz 0.6 0.7 dB S31 5 G to antenna insertion loss 4900 to 5850 MHz 0.6 0.7 dB Attenuation S21 2 G to antenna attenuation 4900 to 5850 MHz 20 dB S31 5 G to antenna attenuation 2400 to 2483.5 MHz 18 dB Out of band attenuation 5850 to 7000 MHz 15 S21 2 G to antenna attenuation 7000 to 9500 MHz 9 dB 9800 to 10500 MHz 16 S31 5 G to antenna attenuation 9800 to 11650 MHz 11 dB 2/10 DocID023193 Rev 2 Obsolete Product(s) - Obsolete Product(s)