ESDA17P100-1U2M High power transient voltage suppressor Datasheet - production data Description The ESDA17P100-1U2M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients. The device is ideal for applications where high power TVS and board space saving is required. Figure 1: Pin configuration QFN package Features Low clamping voltage Peak pulse power: 4800 W (8/20 s) Stand-off voltage 15 V Unidirectional diode Table 1: Device summary Low leakage current: 0.2 A at 25 C Pin Name Description Complies with IEC 61000-4-2 level 4 30 kV (air discharge) 1 VBUS VBUS pin 30 kV (contact discharge) 2, 3, 4 NC Non connected pin 5, 6 GND Ground pin Applications TAB GND Ground pin Where transient overvoltage protection in ESD sensitive equipment is required, such as: Smartphones, mobile phones, tablets, portable multimedia USB V protection BUS Power supply protection Battery protection March 2017 Doc030246 Rev 1 1/10 www.st.com This is information on a product in full production. Characteristics ESDA17P100-1U2M 1 Characteristics Table 2: Absolute maximum ratings (Tamb = 25 C) Symbol Parameter Value Unit IEC 61000-4-2: >30 VPP Peak pulse voltage Contact discharge kV >30 Air discharge P Peak pulse power 8/20s 4800 W PP IPP Peak pulse current 8/20s 160 A T Storage junction temperature range -55 to + 150 stg C Top Operating junction temperature range -55 to + 150 Figure 2: Electrical characteristics (definitions) Table 3: Electrical characteristics (T = 25 C) amb Symbol Test condition Min. Typ. Max. Unit 17.7 VBR IR = 1 mA 15.7 16.5 V V 15 V RM IRM VRM = 12 V 100 nA I V = 15 V 200 nA RM RM Rd 8/20 s 0.07 V I = 100 A, 8/20 s 24 26 V CL PP VCL IPP = 160 A, 8/20 s 28 30 V C V = 0 V, f = 1 MHz, V = 30 mV 1200 pF BUS BUS OSC 2/10 Doc030246 Rev 1