ESDAXLC6-1MY2 STMicroelectronics

ESDAXLC6-1MY2 Datasheet Extra low capacitance single line transient voltage surge suppressor (TVS) Features Extra low capacitance 0.6 pF max on a wide frequency spectrum (200 MHz - 3000 MHz) Unidirectional device Low clamping factor V / V CL BR Fast response time Very thin package: 0.55 mm max Low leakage current SOD882 (QFN-2L) High ESD protection level High integration Suitable for high density boards Complies with the following standards I/0 1 IEC 61000-4-2 level 4 MIL STD 883G-Method 3015-7: class 3B Applications I/0 2 Where transient overvoltage protection in ESD sensitive equipment is required, such as: GND Computers Printers Communication systems Product status link Cellular phone handsets and accessories ESDAXLC6-1MY2 Video equipment Portable equipment Description The ESDAXLC6-1MY2 is a single line Transil diode designed specifically for the protection of integrated circuits in portable equipment and miniaturized electronics devices subject to ESD transient over voltages. Packaged in SOD882 (QFN-2L), it minimizes PCB consumption. DS6650 - Rev 4 - September 2019 www.st.com For further information contact your local STMicroelectronics sales office.ESDAXLC6-1MY2 Characteristics 1 Characteristics Table 1. Absolute maximum ratings (T = 25 C) amb Symbol Parameter Value Unit V Peak pulse voltage IEC 61000-4-2, level 4 : contact discharge 8 kV PP (1) P Peak pulse power 8/20s , T initial = T 12 W PP j amb I Peak pulse current typical value (8/20 s) 2.8 A PP T Storage temperature range -55 to +150 stg C T Operating temperature range -40 to +125 op 1. For a surge greater than the maximum values, the diode will fail in short-circuit. Figure 1. Electrical characteristics (definitions) I Symbol Parameter V = Breakdown voltage BR I = Leakage current at V VBR VRM RM RM V IRM V = Stand-off voltage RM I R I = Breakdown current R Table 2. Electrical characteristics (values) (T = 25 C) amb Symbol Test conditions Min. Typ. Max. Unit V I = 1 mA 6 - V BR R I V = 3 V - 100 nA RM RM C V = 0 V, F = (200 MHz - 3000 MHz), V = 30 mV - 0.6 pF LINE R OSC DS6650 - Rev 4 page 2/12