L6386E STMicroelectronics

L6386E High-voltage high and low side driver Features High voltage rail up to 600 V DIP-14 SO-14 dV/dt immunity 50 V/nsec in full temperature range Driver current capability: 400 mA source, Description 650 mA sink Switching times 50/30 nsec rise/fall with 1 nF The L6386E is an high-voltage device, load manufactured with the BCD off-line technology. It has a driver structure that enables to drive CMOS/TTL Schmitt trigger inputs with independent referenced channel power MOS or hysteresis and pull down IGBT. The high-side (floating) section is enabled Under-voltage lock out on lower and upper to work with voltage rail up to 600 V. The logic driving section inputs are CMOS/TTL compatible for ease of Integrated bootstrap diode interfacing with controlling devices. Outputs in phase with inputs Figure 1. Block diagram BOOTSTRAP DRIVER Vboot 14 C BOOT V H.V. CC UV UV HVG DETECTION DETECTION 4 R DRIVER HVG R 13 3 S LEVEL HIN OUT SHIFTER 12 TO LOAD V CC LOGIC 2 LVG SD 9 LVG PGND DRIVER 1 8 LIN DIAG - VREF 5 + SGND 7 6 CIN D97IN520D July 2009 Doc ID 13989 Rev 2 1/18 www.st.com 18Contents L6386E Contents 1 Electrical data 3 1.1 Absolute maximum ratings . 3 1.2 Thermal data . 3 1.3 Recommended operating conditions . 3 2 Pin connection 4 3 Electrical characteristics . 5 3.1 AC operation . 5 3.2 DC operation . 5 3.3 Timing diagram 7 4 Bootstrap driver 8 4.1 CBOOT selection and charging . 8 5 Typical characteristic . 10 6 Package mechanical data 13 7 Ordering information . 16 8 Revision history . 17 2/18 Doc ID 13989 Rev 2