LDL112DR STMicroelectronics

LDL112 Datasheet 1.2 A low quiescent current LDO with reverse current protection Features Input voltage from 1.6 to 5.5 V Very low-dropout voltage (300 mV typ. at 1 A load) Low quiescent current (35 A typ. at no-load, 1 A max. in off mode) Output voltage tolerance: 2.0% at 25 C 1.2 A guaranteed output current Wide range of output voltages available on request: 0.8 V to 5 V with 50 mV step and adjustable Logic-controlled electronic shutdown Compatible with ceramic capacitor C = 1 F OUT Internal current and thermal limit Available in DFN6 (2x2), DFN6 (3x3) mm, SO8-batwing and PPAK packages Temperature range: -40 C to 125 C Reverse current protection Output discharge function (optional) Applications Consumer Computer Battery-powered systems Low voltage point-of-load Maturity status link USB-powered devices LDL112 Description The LDL112 is a low-dropout linear regulator, which can provide a maximum current of 1.2 A, with a typical dropout voltage of 300 mV. It is stabilized with a ceramic capacitor on the output. The very low drop voltage, low quiescent current and reverse current protection features make it suitable for low power battery-powered applications. The enable logic control function puts the LDL112 in shutdown mode allowing a total current consumption lower than 1 A. The device is equipped with current limit and thermal protection. DS10321 - Rev 3 - February 2019 www.st.com For further information contact your local STMicroelectronics sales office.LDL112 Diagram 1 Diagram Figure 2. Block diagram V V IN IN Thermal Thermal Current limit Current limit protection protection Bandgap Bandgap reference reference Reverse Reverse 800mV 800mV current current protection protection OPAMP OPAMP VFB VFB PMOS PMOS V V OUT OUT * * Internal Internal enable enable ADJ EN EN Enable Enable GND GND Adjustable version Fixed version AM14036V1 Note: (*) The output discharge function is optional. DS10321 - Rev 3 page 2/32