STEVAL-IDS001V5M

STEVAL-IDS001V5M 915 MHz RF USB dongle based on the SPIRIT1 SPSGRF-915 module Data brief Description The STEVAL-IDS001V5M evaluation board is for the SPSGRF-915 FCC certified module based on the low-power, low-rate, sub-1GHz SPIRIT1 transceiver. The SPSGRF-915 module integrates the Balun (BALF-SPI-01D3) and a chip antenna, and operates in the 915 MHz ISM band. The board is equipped with an STM32L1 low-power microcontroller to control the SPIRIT1 and it also features a USB connector for PC GUI interaction and firmware updates, like the one available for SPIRIT1 evaluation kit. An SWD connector allows the development of specific firmware on the microcontroller. Features RF SPIRIT1 USB dongle based on SPSGRF-915 for 915 MHz SPSGRF-915 module is based on: SPIRIT1 RF Sub-GHz Integrated Filter/Balun Chip antenna On board STM23L low power 32-bit ARM Cortex-M3 microcontroller Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK and ASK Air data rate: from 1 to 500 kbps Fully compliant in terms of firmware and GUI with the SPIRIT1 development kits Debug connector USB interface Contains FCC ID: S9NSPSGRF RoHS compliant July 2015 DocID028063 Rev 1 1/6 www.st.com For further information contact your local STMicroelectronics sales office Obsolete Product(s) - Obsolete Product(s)Schematic diagrams STEVAL-IDS001V5M 1 Schematic diagrams Figure 1: STEVAL-IDS001V5M part 1 Figure 2: STEVAL-IDS001V5M part 2 USB & EEPROM USB 5V D VDD U2 J2 USBA Male USB 5V USB DP 1 6 DP 1 6 D1 D4 DM 2 C10 R10 DP 3 2 5 16V 100nF 100k GND VBU S 4 5 SMD 0402 SMD 0402 USB DM DM 3 4 D2 D3 Digikey WM17118-ND Molex 048037-1000 C11 GND U3 EEPROM CS 1 USBLC6-2P6 16V 100nF /S SPI2 CLK SMD 0402 6 3 C /W SPI2 MOSI GND 5 7 D /HOL D SPI2 MISO 2 Q M95640-RMC6TG GND GND 2/6 DocID028063 Rev 1 Obsolete Product(s) - Obsolete Product(s) 2 1 2 1 2 1 4 GND 8 VCC 9 E PA D