S T E VA L - I F P 0 1 7 V 3 Evaluation board for IO-Link transceiver device L6362A Data brief RoHS compliant Description The STEVAL-IFP017V3 is an evaluation board designed to analyze the features of L6362A, including fast demagnetization, reverse polarity, overload, overtemperature, ground and supply open wire protections. The highly robust design of the L6362A allows the STEVAL-IFP017V3 to meet IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-5- 2/IEC 61000-4-5 (surge) without additional external components. The STEVAL-IFP017V3 offers dedicated input and output screw connectors to facilitate easy and flexible connections for user requirements. Features The on-board red and green LEDs signal the IC status. Operating voltage from 7 to 36 V Operating current up to 300 mA On the STEVAL-IFP017V3, the exposed pad of Configurable in push-pull, high-side or low- the L6362A is connected to an electrically floating side copper area which acts as a heatsink. Overcurrent protection with cutoff function Overtemperature protection Suitable to drive R, L and C loads Delayed cutoff for quick charging of capacitive loads Able to handle up to 500 mJ inductive loads Full reverse polarity protection on V , GND, CC OUTH, OUTL and I/Q pins Green device status LED (ON or OFF) Red diagnostic LEDs for: cutoff and overtemperature events overload Supports COM1, COM2 and COM3 Meets IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-5-2/IEC 61000-4-5 (surge) requirements May 2016 DocID029010 Rev 3 1/4 www.st.com For further information contact your local STMicroelectronics sales office Schematic diagram STEVAL-IFP017V3 1 Schematic diagram Figure 1: STEVAL-IFP017V3 circuit schematic 2/4 DocID029010 Rev 3