STM32091C-EVAL Evaluation board for STM32F0x1 line - with STM32F091VC MCU Data brief SWD debug support, ST-LINK/V2-1 embedded 240x320 TFT color LCD connected to SPI interface of STM32F091VCT6 Joystick with 4-direction control and selector Reset, Tamper & User buttons 4 color user LEDs and 2 LEDs as MCU low power alarm Extension connector for daughter board or wrapping board MCU voltage choice fixed 3.3v or adjustable from 1.65v to 3.6v Touch sensing buttons RTC with backup battery CAN2.0A/B compliant connection Light dependent resistor (LDR) Potentiometer Two HDMI connectors with DDC & CEC Smart card slot 8x USARTs chain connector 1. Picture not contractual Features Three 5V power supply options: power jack, ST-LINK/V2-1 USB connector or daughter board Stereo audio jack which supports headset with earphone connected to DAC and microphone connected to ADC of STM32F091VCT6 2G or more Byte SPI interface MicroSD card I2C compatible serial interface temperature sensor RF E2PROM RS232 & RS485 communication IrDA transceiver IR LED & IR receiver October 2014 DocID026798 Rev 2 1/5 For further information contact your local STMicroelectronics sales office. www.st.comDescription STM323091C-EVAL 1 Description The STM32091C-EVAL evaluation board has been designed as a complete demonstration and development platform for STMicroelectronics ARM cortex -M0 core-based 2 STM32F091VCT6 microcontroller with two I C, two SPI, eight USART, one CAN, one 12bit ADC, two 12bit DAC, two GP comparators, internal 32KB SRAM and 256KB Flash, Touch sensing, CEC, SWD debugging support. The full range of hardware features on the board can be used to evaluate all peripherals (8x USARTs, RS232, RS485, Audio DAC, microphone ADC, touch sensing buttons, TFT LCD, CAN, IrDA, IR LED, IR receiver, LDR, MicroSD card, CEC on two HDMI connectors, smart card slot, RF E2PROM & temperature sensor, etc.) and develop your own applications. Extension headers make it possible to easily connect a daughter board or wrapping board for your specific application. An ST-LINK/V2-1 is integrated on the board as embedded in-circuit debugger and programmer for the STM32 MCU. 2/5 DocID026798 Rev 2