TSX711, TSX711A, TSX712 Datasheet Low-power, precision, rail-to-rail, 2.7 MHz, 16 V CMOS operational amplifiers TSX711 and TSX711A Features Low input offset voltage: 200 V max. Rail-to-rail input and output Low current consumption: 800 A max. Gain bandwidth product: 2.7 MHz SOT23-5 Low supply voltage: 2.7 - 16 V TSX712 Unity gain stable Low input bias current: 50 pA max. High ESD tolerance: 4 kV HBM Extended temp. range: -40 C to 125 C Automotive qualification MiniSO8 SO8 Applications Battery-powered instrumentation Instrumentation amplifier Active filtering DAC buffer High-impedance sensor interface Current sensing (high and low side) Maturity status link Description TSX711, TSX711A, TSX712 The TSX711, TSX711A, and TSX712 series of operational amplifiers (op amps) offer high precision functioning with low input offset voltage down to a maximum of 200 V Related products at 25 C. In addition, their rail-to-rail input and output functionality allow these products to be used on full range input and output without limitation. This is For higher speeds particularly useful for a low-voltage supply such as 2.7 V that the TSX71x is able to TSX7191, TSX7192 with similar operate with. precision Thus, the TSX71x has the big advantage of offering a large span of supply voltages, For low-power TSX561, TSX562 ranging from 2.7 V to 16 V. They can be used in multiple applications with a unique features reference. For micro-power TSX631, TSX632 Low input bias current performance makes the TSX71x perfect when used for signal features conditioning in sensor interface applications. In addition, low-side and high-side TSX921, TSX922 For higher speeds current measurements can be easily made thanks to rail-to-rail functionality. High ESD tolerance (4 kV HBM) and a wide temperature range are also good reasons to use the TSX71x in the automotive market segment. DS10192 - Rev 6 - September 2020 www.st.com For further information contact your local STMicroelectronics sales office.TSX711, TSX711A, TSX712 Package pin connections 1 Package pin connections Figure 1. Pin connections (top view) 1 OUT 5 VCC+ VCC- 2 + - IN- IN+ 3 4 SOT23-5 OUT1 1 8 VCC+ IN1- 2 - 7 OUT2 + IN1+ 3 - 6 IN2- + VCC- 4 5 IN2+ MiniSO8 and SO8 DS10192 - Rev 6 page 2/29