VNI4140KTR-32 STMicroelectronics

VNI4140K-32 Quad high-side smart power solid-state relay Datasheet - production data Fast demagnetization of inductive loads Conforms to IEC 61131-2 PowerSSO-24 ESD according to IEC 61000-4-2 up to +/- 25 KV Features Description (1) (1) (1) The VNI4140K-32 is a monolithic device made Type V R I V demag DS(on) out CC using STMicroelectronics VIPower technology, VNI4140K-32 V -41 V 0.08 1 A 41 V intended to drive four independent resistive, CC capacitive or inductive loads with one side 1. Per channel connected to ground. Active current limitation avoids the system power supply dropping in case Output current: 1 A per channel of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short- Shorted load protections circuit. In overload conditions, the channel turns Junction overtemperature protection OFF and back ON automatically so to maintain Case overtemperature protection for thermal junction temperature between T and T . If this TSD R independence of the channels condition causes case temperature to reach T , the overloaded channel is turned OFF and CSD Thermal case shutdown restart not restarts only when case temperature has simultaneous for the various channels decreased down to T . In case of more than one CR Protection against loss of ground channel in overload, restart of the overloaded Current limitation channels is not simultaneous, in order to avoid high peak current from the supply. Non- Undervoltage shutdown overloaded channels continue operating normally. Open drain diagnostic outputs The open drain diagnostic outputs indicate 3.3 V CMOS/TTL compatible inputs overtemperature conditions. Figure 1. Block diagram December 2013 DocID022576 Rev 6 1/28 This is information on a product in full production. www.st.com 28Contents VNI4140K-32 Contents 1 Pin connection 5 2 Maximum ratings 7 2.1 Thermal data . 7 3 Recommended 7 4 Electrical characteristics . 8 5 Truth table 12 6 Thermal management . 13 7 Switching waveforms . 14 8 Pin functions 15 9 Package and PCB thermal data . 17 9.1 VNI4140K-32 thermal data 17 10 Reverse polarity protection 19 11 Demagnetization energy . 20 12 Package mechanical data 21 13 Ordering information . 26 14 Revision history . 27 2/28 DocID022576 Rev 6