SMD Power Inductor 0512CDMCC/DS Description Metal compound molding type construction Magnetically shielded Low audible core noise Suitable for large current. LWH:5.75.41.2mm Max. Product weight: 0.164g (Ref.) Moisture Sensitivity Level: 1 Environmental Data Operating temperature range: -55C~+125C (including coils self temperature rise) Storage temperature range: -55C~+125C Packaging Carrier tape and reel packaging. 2000pcs per reel Applications Ideally used in notebook, ultrabook, tablet PC, LCD display, server application. HDD,SSD modules application. Low profile, high current power supplies. Battery powered devices. High current, POL converters. DC/DC converter in distributed power systems. Dimension - mm Recommended Land pattern - mm Wire Connection Note This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 1 of 4 Ver. 2021-03-05 WWW.SUMIDA.COMSMD Power Inductor 0512CDMCC/DS Electrical Characteristics Inductance Temperature Within D.C.R. at 20 Saturation Current Rise Current Part Number Max.(Typ.) (m) (A) Max.(Typ.) 2 (A) Max.(Typ.) (H) 1 3 0512CDMCCDS-R10MC 0.10 20% 5.40 14.50 (14.00) (4.50) (17.00) 0512CDMCCDS-R22MC 0.22 20% 8.40 11.90 (10.60) (7.00) (14.00) 0512CDMCCDS-R33MC 0.33 20% 10.80 11.00 (9.50) (9.00) (13.00) 0512CDMCCDS-R47MC 0.47 20% 13.20 9.40 (8.80) (11.00) (11.00) 0512CDMCCDS-R56MC 0.56 20% 18.60 6.80 (7.20) (15.50) (8.00) 20.40 6.60 0512CDMCCDS-R68MC 0.68 20% (7.00) (17.00) (7.80) 31.80 5.50 0512CDMCCDS-1R0MC 1.00 20% (5.70) (26.50) (6.50) 0512CDMCCDS-1R5MC 1.50 20% 42.00 5.10 (5.30) (35.00) (6.00) 0512CDMCCDS-2R2MC 2.20 20% 72.60 4.10 (3.60) (60.50) (4.80) 0512CDMCCDS-3R3MC 3.30 20% 107.40 3.20 (2.90) (89.50) (3.80) 0512CDMCCDS-4R7MC 4.70 20% 166.20 2.70 (2.30) (138.50) (3.20) 1 Measuring frequency Inductance at 100kHz 1V. 2 Saturation current: This indicates the actual value of D.C. current when the inductance becomes 30% lower than its initial value. 3 Temperature rise current: The actual value of D.C. current when the temperature of coil becomes T=40 (Ta25).(Test board condition: FR4, Copper=70m, four-layer PWB t=1.6mm) Solder Reflow Condition Note This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 2 of 4 Ver. 2021-03-05 WWW.SUMIDA.COM