SFSD1024L1BN2TO-I-ME-161-STD

Product Fact Sheet Industrial SD Memory Card S-200 Series SPI, SD compliant BU: Flash Products Date: March 29, 2012 Revisio n: 1.00 File: factsheet - titel rz4. docx Prod uct fact shee t Swissbit AG Revision: 1.22 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com S-200 fact sheet SD-LxBN Rev122 Switzerland industrial swissbit.com Page 1 of 3 S-200 Series Industrial SD Memory Card 1 Feature Custom-designed, highly-integrated memory controller o Fully compliant with SD Memory Card specification 2.0 o Four integrated 4KByte Sector Buffers for fast data transfer o SPI Mode support Standard SD Memory Card form factor o 32.0mm x 24.0mm x 2.1mm o Write Protect slider 2.73.6V normal operating voltage 2.03.6V basic communication (CMD0, 15, 55 ACMD41) voltage Low-power CMOS technology Wear Leveling: equal wear leveling of static and dynamic data The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed. Patented power-off reliability o No data loss of older sectors o Max. 16 sectors data loss (old data kept) if power off during writing High reliability o Best available SLC NAND Flash technology o Designed for embedded market o MTBF: > 3,000,000 hours o Number of insertions: >10,000 o Extended Temperature range -25 up to 85C o Optional industrial Temperature range available -40 up to 85C Hot swappable High performance o SD burst up to 25MB/s o SD Low speed 025MHz clock rate o SD High speed 2550MHz clock rate o Flash burst up to 40MB/s Available densities o up to 2GBytes (higher densities are in the SDHC S-220 Series available up to 8GB) Controlled BOM Life Time Monitoring SD/SPI with standard or vendor commands Swissbit AG Revision: 1.22 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com S-200 fact sheet SD-LxBN Rev122 Switzerland industrial swissbit.com Page 2 of 3