TG4040 PUTTY Thermal Putty Features TG4040 Putty is a silicone-type spacer with 3 W/m.K Have enough compressibility, and restore to original state after unloaded It has very low thermal resistance and good creep performance It is the best for north bridge IC Properties Thermal Conductivity: 3.0 W/m.K Have enough compressibility Very low thermal resistance 7 0.5 6 0.4 5 4 0.3 3 0.2 2 0.1 1 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0 10 20 30 40 50 60 70 80 90 100 BLT (mm) Compressibility % Reliability Thermal Impedance Initial 250 Hr 500 Hr 1000 Hr 80C Aging 0.117 0.118 0.118 0.121 150C Aging 0.117 0.119 0.122 0.12 85C/85% RH 0.117 0.121 0.125 0.123 Properties TG4040 Putty Unit Tolerance Test Method Color - - Visual Blue Solid content % - - 100(one-part) Viscosity 0.5rpm Pas - Brookfield 3,000 Density g/cm3 - ASTM D792 2.6 Thermal Conductivity W/m.K 0.3 ASTM D5470 3 Low MW Siloxane (D4-10) ppm - GC/MS 50 TML % - ASTM E595 0.3 CVCM 0.09 % - ASTM E595 14 Volume Resistivity Ohm-cm - ASTM D257 10 Working Temperature -50 to 180 C - - T-Global Technology Co., Ltd No. 33, Ln. 50, Daren Rd., Taoyuan City, Taoyuan County 33068, Taiwan TEL: +886-3-3618899 FAX: +886-3-3665666 www.tglobalthermal.com www.tglobal.com.tw Thermal Interface Materials: Thermal Pad, Thermal Tape, Thermal Grease, Ceramic Heat Spreader Version1 20131202 psi Thermal impedance Cin2/W X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for t global manufacturer: Other Similar products are found below : L373-150-0.5A L373S-150-0.5 LIV2-150X150X0.15 S606C H482-150-2.0A LI-98-150-025