DBP.433.T.A.30 Taoglas

SPECIFICATION Part No. : DBP.433.T.A.30 Description : Dielectric Band Pass Filter for 433MHz Bandwidth 2MHz Features : Center Frequency 433.92MHz Supports ISM 433.05MHz to 434.79MHz use. Low Insertion Loss Low Pass-Band Ripple High Ultimate Attenuation Dims: 10*7.5*3.7mm SPE-17-08-058/B/AW Page 1 of 12 1. Introduction Taoglas are utilizing their deep understanding of the RF component design and manufacturing process to provide high-quality, small-form-factor, cost-effective and easy to implement RF filters. The Taoglas Filters Division will feature a range of off- the-shelf filters for a variety of applications, including filters for emerging license free bands used for IoT and for GPS L1/L2 and L1/L5 applications. We can also work with customers to develop bespoke filter solutions. Taoglas dielectric filters are designed to be used in wireless transmitters or receivers. These filters are designed to protect the LNA from noisy out of band emissions originated from nearby transmitters that can overdrive, or even damage your LNA. Overdriving the LNA results in non-linear distortion which negatively impacts the sensitivity of your receiver. By selecting the proper Taoglas filter you can eliminate unnecessary out of band noise while maintaining minimal in-band insertion loss. The filter is manufactured as a single ceramic block monoblock which provides high reliability, low insertion loss and high attenuation in a simple compact SMD package. The DBP.433.T.A.30 is a standard Taoglas product but can be customized for specific customer needs. For more information please contact your regional sales office. SPE-17-08-058/B/AW Page 2 of 12