SWS300&600 Series Single Output General Purpose Power Supplies Low cost Active Power Factor Correction Input Transient Protected IEC61000-4 Enclosed Key Market Segments & Applications Factory Automation Process Control, NC-Machining, Automotive, Packaging Equipment, Materials Handling, Chemical Processing, Robots Test & Measurement Burn-in & Test, Automated, Detection Test, Instrumentation, Measurement Automated Service Vending Machines, Elevators, Video Gaming, Point of Sale Equipment SWS Features and Benefits Feature Benefit Meets IEC61000-4 Greater reliability Global safety Approvals Supports Global Use Power Factor Corrected Supports Global Use Level B EMI Assists System Compliance Specifications MODEL SWS300 SWS600 ITEMS Input Voltage range (1) - 85 - 265VAC (47 - 63Hz) or 120 - 370VDC Inrush Current (115 / 230VAC) A 20 / 40 Power Factor - Meets EN61000-3-2 Input Current (100/200VAC) A 3.6 / 1.8A 7.2 / 3.6A Temperature Coefficient - <0.02%/C Overcurrent Protection -- >105%, Constant current style Overvoltage Protection V 3.3V: 4.1-5.3V, 5V: 6.25-7.25V, 12V: 13.8-16.8V, 15V: 18.7-22.5V, 24V: 30-34.8V, 36V: 41.4-50.4V, 48V: 60-69.9V Overtemperature Protection - Yes, cycle AC to reset Hold Up Time (Typ) ms 20ms at 115/230VAC Leakage Current (max) mA 0.75mA 1.5mA Remote Sense - None Yes Parallel Connection - None Yes Remote On/Off - None Yes AC Fail Signal - None Yes, open collector output LED Indicator - Green LED = On Operating Temperature - -10 to +65C (See table for derating - model specific) Storage Temperature C -30 to +85C Operating Humidity - 30 - 90% RH (non condensing) Storage Humidity - 10 - 95% RH (non condensing) Cooling - Internal fan Withstand Voltage - I/P to Grnd 2kVAC, I/P to O/P 3kVAC, O/P to Grnd 500VAC, O/P to CNT 100VAC for 1 min Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) - 10 - 55Hz (sweep for 1 min)19.6m/s constant X, Y, Z 1 hour each plane) Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11 Safety Agency Approvals - UL60950, CSA60950, EN60950, EN50178, CE Mark Conducted & Radiated EMI - EN55011 / EN55022-B, FCC Class B Weight (Typ) g 950 2000 Size (WxHxD) mm 52 x 102 x 198 92 x 120 x 190 Warranty yrs Two Years Notes: (1) Derate linearly to 85% load from 115VAC to 85VAC input (derate to 90% load for SWS600-5) SWS300&600 SERIES 1BAR CODE INPUT: 100-240VAC ~ 4.4A SWS300- 5 MADE IN CHINA OUTPUT: 5 V 55 A 50/60Hz V ADJ H +V +V +V -V -V -V L N H D K Models Adjust Max Load Line Ripple Eff.(3) Model Voltage Range Curr. Reg mV Reg mV Noise (typ)% SWS300-3 3V 2.97-3.96V 55 40 20 120 67/70 SWS300-5 5V 4.5-6V 55 40 20 120 76/79 SWS300-12 12V 9.6-13.2 26 96 48 120 77/80 SWS300-15 15V 13.2-18V 21 120 48 120 79/83 SWS300-24 24V 20-28.8 13 120 48 150 82/85 SWS300-36 36V 28.8-40V 8.7A 180 72 200 82/85 SWS300-48 48V 40-57.6 6.7 240 96 240 83/86 SWS600-3 3.3V 2.97-3.96V 55 40 20 120 69/71 SWS600-5 5V 4.5-6V 100 (2) 40 20 100 74/77 SWS600-12 12V 9.6-13.2 50 96 48 120 78/81 SWS600-15 15V 13.2-18V 40 120 48 120 80/83 SWS600-24 24V 20-28.8 25 120 48 150 81/84 SWS600-36 36V 28.8-40V 16.7 180 72 200 81/85 SWS600-48 48V 40-57.6 12.5 240 96 240 82/85 Notes: (2) SWS600-5 has peak rating of 120A for 10s (3) 115/230VAC Derating Model 50C 55C 60C 65C SWS300 100% 91.6% 83.3% 50% SWS600 100% 85% 70% 55% Additional derating required when operating SWS600 with side ventilation holes blocked - see installation manual. SWS 300 Outline Drawing VR FOR Vadj. LED (18.1) 150 +/- 0.5 21.5 +V +V +V -V -V M4 tapped hole max depth 6mm -V FG( ) AC(L) AC(N) (19.6) 198 +/- 1.0 9-M3.5 13MAX TERMINAL COVER M4 tapped hole max depth 6mm 155 +/- 0.5 16 2 SWS300&600 SERIES 102 +/- 1.0 (95) (8.5) 9.5 8.2 (12.1) 15 6.5 30 +/- 0.5 24 60 +/- 0.5 52 +/- 1.0