VS150E-24

VS-E SERIES Single Output 50 - 150W VS150E/A VS100E/L VS75E Y E VS50E A R S UL62368-1/ Low Voltage Directive Electrical Appliance warranty CSA62368-1 and Material Safety Law (Input Voltage 100VAC) Features 30% Miniaturization from previous models. Blank : PCB Type 100% load at 50C, suitable for industrial equipment. Y Y A : With cover E E 5 Years warranty (conditions applied) A A L : L plate type R R S S Low Voltage Directive UL60950-1 EN60950-1(TUV) Low Voltage Directive Electrical Appliance warranty Electrical Appliance warranty CSA60950-1 Rated Output Voltage and Material Safety Law and Material Safety Law (Input Voltage 100VAC) (Input Voltage 100VAC) Rated Output Power Applications Series Name Conformity to RoHS Directive Product line up Model VS50E VS75E VS100E VS150E 50W 75W 100W 150W Output Voltage Output Current Ef ciency(Typ) Output Current Ef ciency(Typ) Output Current Ef ciency(Typ) Output Current Ef ciency(Typ) 3.3V 10A 80% 15A 80% 20A 80% 30A 80% 5V 10A 85% 15A 85% 20A 85% 30A 86% 12V 4.3A 85% 6.3A 85% 8.5A 85% 12.5A 87% 15V 3.5A 85% 5.0A 85% 7.0A 85% 10.0A 87% 24V 2.5A 85% 3.2A 86% 4.3A 86% 6.3A 87% 48V 1.3A 87% 1.6A 87% 2.2A 87% 3.2A 88% Option line up Model VS50E VS75E VS100E VS150E 50W 75W 100W 150W Output Voltage /A /L /CO2 /FV /A /L /CO2 /FV /A /L /CO2 /FV /A /L /CO2 /FV 3.3V 5V 12V 15V 24V 48V web190801 All speci cations are subject to change without notice. VS 50E VS50E Specifications MODEL ITEMS/UNITS Voltage Range (*2) V AC 85 - 132 Frequency (*2) Hz 47 - 63 % 80 85 87 (*1) Input A 0.9 1.1 1.3 Current (Typ) (*1) Inrush Current (Typ) (*1)(*11) A 30 at Cold Start Leakage Current (*8) mA Less than 0.5 VDC 3.3 5 12 15 24 48 Nominal Voltage A 10 4.3 3.5 2.5 1.3 Maximum Current Maximum Power W 33.0 50.0 51.6 52.5 60.0 62.4 Maximum Line Regulation (*3)(*4) mV 20 48 60 96 192 mV 40 96 120 150 240 Maximum Load Regulation (*3)(*5) Output Less than 0.02% / C (*3) Maximum Ripple & Noise(0Ta70C) (*3) mVp-p 120 150 200 Maximum Ripple & Noise(-10Ta<0C) (*3) mVp-p 160 180 240 ms 20 Hold-up Time (Typ) (*1) VDC 2.97 - 3.63 4.5 - 5.5 10.8 - 13.2 13.5 - 16.5 21.6 - 26.4 43.2 - 52.8 Voltage Adjustable Range (*12) Over Current Protection (*6) A 10.5 - 4.51 - 3.67 - 2.62 - 1.36 - Over Voltage Protection (*7) VDC 3.80 - 4.46 5.75 - 6.75 13.8 - 16.2 17.3 - 20.3 27.6 - 32.4 55.2 - 64.8 Function Parallel Operation - Possible Series Operation Operating Temperature (*9) C Convection : -10 - +70 (-10 - +50:100%, +60:70%, +70:20%) Storage Temperature C -30 - +85 Operating Humidity %RH 30 - 90 (No dewdrop) %RH 10 - 95 (No dewdrop) Storage Humidity Environment At no operating, 10 - 55Hz (Sweep for 1min) Vibration 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Convection Cooling Cooling Input - FG : 2kVAC (10mA), Input - Output : 2kVAC (10mA) Withstand Voltage Output - FG : 500VAC (20mA) for 1min Isolation Isolation Resistance More than 100M at 25C and 70%RH Output - FG : 500VDC Approved by UL62368-1, CSA62368-1, EN62368-1, EN50178(OV II), UL60950-1, CSA60950-1, EN60950-1. Safety Standards (Expire date of 60950-1: 20/12/2020) Designed to meet Den-an Appendix 12 (J60950-1). Standards EMI Designed to meet EN55011/EN55032-B, FCC-B, VCCI-B Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), Immunity -5(Level 2,3), -6(Level 3), -8(Level 4), -11 Weight (Typ) g 150 Mechanical Size (WHD) (*10) mm 50 x 23 x 132 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. (*1) At 100VAC, Ta=25C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 120VAC(50/60Hz). (*3) Please refer to Fig. A for measurement of line & load regulation and ripple voltage. (*4) 85 - 132VAC, constant load. (*5) No load-Full load, constant input voltage. (*6) Fold back current limit with automatic recovery. Avoid to operate at over load or short circuit condition for more than 30seconds. (*7) OVP circuit will shut the output down, manual reset (Re power on). (*8) Measured by the each measuring method of UL, CSA, EN and DENAN(at 60Hz), Ta=25C. (*9) Ratings - Derating at standard mounting. Refer to output derating curve(A239-01-02 ). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. (*10) Not include lead length on solder side. (*11) Inrush Current suppressors type. Limits vary according to ambient temperature and in case of re-entry. (*12) All speci cations are subject to change without notice.