B25620B0557K881

Film Capacitors Power Electronic Capacitors MKP DC Series/Type: B2562 Ordering code: B2562* Date: September 2014 Version: 9 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers Please fill in the table and then change the color towhit. This ensures that the table disappears (invisible) for the customer PDF. Don t change formatting when entering or pasting text in the table and don t add any cell or line in and to it Identification/Classification 1 Film Capacitors Power Electronic Capacitors (header 1 + top left bar): Identification/Classification 2 MKP DC (header 2 + bottom left header bar): Ordering code: (top right header bar) B2562* Series/Type: (bottom right header bar) B2562 Preliminary data (optional): (if necessary) Department: FILM R&D / CAP PM FILM P Date: September 2014 Version: 9 EPCOS AG 2014. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. Film Capacitors Power Electronic Capacitors B2562* MKP DC B2562 1. Construction and general data Characteristics Standard capacitance tolerance K: 10% -4 Dielectric dissipation factor (tan ) 2 10 o 55 ... +85 C stg Expected lifetime t 100000 h at +75C (refer to section 1) LD (co) hs Fit rate 200 (refer to section 2) 55 C Minimum temperature min. Maximum temperature +70 C (refer to section 2) max. Storage temperature 55 ... +85 C stg +85 C for diameter 85 and 90 mm Maximum hotspot temperature hs (refer to section 1) +75 C for diameter 116 mm Climatic category 55/70/56 Maximum altitude 2000 m above sea level (derating curves available upon request) Test data Voltage between terminals V 1.5 VDC , 10 s TT Voltage between terminals and case V 4000 VAC, 10 s TC -3 Dissipation factor tan (100 Hz) 1.0 10 Life test According to IEC 61071 Cooling Naturally air-cooled (or forced air cooling) Degree of protection Indoor mounting Design data Impregnation Resin filling: Non PCB, hard polyurethane (dry type) Mounting and grounding M12 threaded bolt on bottom of the aluminum case Max. torque (case) M12 stud 10 Nm Max. torque terminal Female M6: 5 Nm Female M8: 6 Nm Male M8: 8 Nm Reference standards IEC 61071 RoHS compliance Certification: UL 810-5th edition (refer to table 1.3) FILM R&D / CAP PM FILM P September 2014 Version 9 Please read Cautions and warnings and Page 2 of 20 Important notes at the end of this document.