B43544A6397M000 TDK

Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43544 Date: December 2013 EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.Snap-in capacitors B43544 Outstanding ripple current, compact 105 C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Telecommunications Features Outstanding ripple current capability Base cooling available upon request for case sizes 30 35 mm to 35 55 mm Rated voltages up to 550 V Very high CV product, compact High reliability Extremely improved performance at high frequencies Very low ESR at operating conditions above 50 C Optimized internal thermal resistance Different case sizes available for each capacitance value Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with PET insulation available Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the case wall Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Please read Cautions and warnings and Page 2 of 21 Important notes at the end of this document.