RM6 Ferrite core Series/Type: B65807 Ordering code: B65807J0000R608 Date: 2017-07-25 Version: 2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers Please fill in the table and then change the color towhit. This ensures that the table disappears (invisible) for the customer PDF. Don t change formatting when entering or pasting text in the table and don t add any cell or line in and to it Identification/Classification 1 RM6 (header 1 + top left bar): Identification/Classification 2 Ferrite core (header 2 + bottom left header bar): Ordering code: (top right header bar) B65807J0000R608 Series/Type: (bottom right header bar) B65807 Preliminary data (optional): Department: SMP MAG D Date: 2017-07-25 Version: 2 EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company. RM6 B65807J0000R608 Ferrite core B65807 Magnetic characteristics (per set) -1 l/A = 0.78 mm l = 28.6 mm e 2 A = 36.6 mm e 2 A = 31 mm min 3 V = 1050 mm e Approx. weight 5.1 g/set Delivery mode Sets Packing Standard Styrofoam Tray (size 200 mm 300 mm) 1) A value L Material Pv Ordering code max e nH W/Set -J without center hole PC200 1100 +30/-20% 680 < 0.3 (1000 kHz, 50 mT, 100 C) B65807J0000R608 < 0.4 (2000 kHz, 30 mT, 100 C) 2) 2) 1350 +30/-20% 840 < 0.5 (1000 kHz, 50 mT, 100 C) 2) < 1 (2000 kHz, 30 mT, 100 C) 1) Measurement Parameter: 10 kHz, 0.25 mT, 100 turns, room temperature. A value is measured acc. to IEC62044-2. An appropriate wringing of cores with polished surface is used to improve reproducibility of L the measurement. (It is recommended to rub the mating surfaces themselves six times in a circular or elliptic arc that matches the core profile before measuring A value). L 2) Magnetised (magnetised in DC field strength H = 200 A/m for 10 s) Material PC200 is not suitable for applications with strong magnetic fields above 80 A/m. With respect to power loss characteristics, customer should assure that there is no overheating in an application. For information only SMP MAG D 2017-07-25 Please read Cautions and warnings and Page 2 of 5 Important notes at the end of this document.